Matronics Email Lists :: View topic - Snap Bushing Through Thick Material

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Snap Bushing Through Thick Material

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Sun Feb 04, 2007 2:36 pm Post subject: Snap Bushing Through Thick Material

I want to install a snap bushing through a thick piece of aluminum. The 

metal is too thick for the metal.  Do I remove the snaps and glue it in 

place with E6000?

-- 

Larry Rosen

RV-10 #356

http://lrosen.nerv10.com

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

nuckollsr(at)cox.net
Guest

Posted: Sun Feb 04, 2007 4:15 pm Post subject: Snap Bushing Through Thick Material

At 05:36 PM 2/4/2007 -0500, you wrote:



 	  Quote: 	
		  



I want to install a snap bushing through a thick piece of aluminum. The 

metal is too thick for the metal.  Do I remove the snaps and glue it in 

place with E6000?


	


   That works. Anything you do to line the hole with

   materials more friendly to wire bundles than aluminum

   is a good thing to do. E6000 is pretty tenacious stuff.



        Bob . . .



        ----------------------------------------

        ( IF one aspires to be "world class",  )

        ( what ever you do must be exercised   )

        ( EVERY day . . .                      )

        (                  R. L. Nuckolls III  )

        ----------------------------------------

sales(at)6440autoparts.co
Guest

Posted: Mon Feb 05, 2007 10:02 am Post subject: Snap Bushing Through Thick Material

Where can I purchase some E6000 ?



Randy



---

mprather(at)spro.net
Guest

Posted: Mon Feb 05, 2007 10:38 am Post subject: Snap Bushing Through Thick Material

AKA "Shoe Goo"



Ebay item number: 190024050461

Matt-



[quote] 

 <sales(at)6440autoparts.com>



              Where can I purchase some E6000 ?



 Randy



 ---

kayce33(at)earthlink.net
Guest

Posted: Mon Feb 05, 2007 11:04 am Post subject: Snap Bushing Through Thick Material

Hi Randy,

I've used E6000 and Goop from Home Depot, they seem to be the same thing. 

Goop comes in many different tubes, I've used plunbers, and RV both again 

seem the same. As a glue, fantastic, and for potting ala Bob's 

cartoons...super. give it a try

Harold, RV9A fuselage

---

sales(at)6440autoparts.co
Guest

Posted: Mon Feb 05, 2007 11:49 am Post subject: Snap Bushing Through Thick Material

Thanks I was hoping I could get it or something as good locally.



Randy



---

nuckollsr(at)cox.net
Guest

Posted: Mon Feb 05, 2007 6:13 pm Post subject: Snap Bushing Through Thick Material

At 11:37 AM 2/5/2007 -0700, you wrote:



 	  Quote: 	
		  



AKA "Shoe Goo"



Ebay item number: 190024050461


	


   This is a pretty amazing product for it's

   shear and peel strengths. I tested it for functionality

   as an adhesive to attach the 'bond studs' we used to

   sell . . .



http://www.aeroelectric.com/Pictures/Materials/Bond_Stud_B.jpg



   At the time, I was buying it as "Shoe Goo" but

   later identified it as a re-branding of E-6000



http://www.eclecticproducts.com/e6000Industrial.htm



   Here are some more details for usage of E-6000

   and close cousins . . .



http://www.eclecticproducts.com/E6000IndusDirections.htm



   The product is now widely distributed. I find it

   in hardware and craft stores. The best prices lately

   have been at Hobby Lobby and Walmart's crafts

   section.



   Bob . . .

raymondj(at)frontiernet.n
Guest

Posted: Mon Feb 05, 2007 8:13 pm Post subject: Snap Bushing Through Thick Material

Just bought a small tube tonight at Menards.



Raymond Julian

Kettle River, MN.



--

sales(at)6440autoparts.co
Guest

Posted: Tue Feb 06, 2007 9:08 am Post subject: Snap Bushing Through Thick Material

Thanks for the links. It looks like it will repair and bond just 

about anything.



Randy



---

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Tue Feb 06, 2007 11:30 am Post subject: Snap Bushing Through Thick Material

I got my E-6000 at Wal-Mart

Larry



 -------------- Original message ----------------------

From: "6440 Auto Parts" <sales(at)6440autoparts.com>

[quote] 

 <sales(at)6440autoparts.com>

 

           Thanks for the links. It looks like it will repair and bond just 

 about anything.

 

 Randy

 

 ---

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum