Matronics Email Lists :: View topic - Camlocs (was Oil access pannel)

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Camlocs (was Oil access pannel)

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

LarryRosen

Joined: 16 Jan 2006
Posts: 415
Location: Medford, NJ

Posted: Thu Feb 15, 2007 7:23 pm Post subject: Camlocs (was Oil access pannel)

Vic use Cam locs on his 10.  I have some photos of his plane from 

Sun-N-Fun posted here

<http://lrosen.nerv10.com/Construct/SunNFun_2006/Vic%20RV10/index.html>



These only show them from the exterior.



Some installation photos I have been sent from other builders including 

Mark's are here

<.http://lrosen.nerv10.com/Construct/camloc/index.html>



Jeff's RV-7a site has some good cam loc info

<http://jeffsrv-7a.com/ENGINE.htm> about 1/2 way down in the Cowling 

Section.



Larry

#356



Niko wrote:

[quote] Mark,

  

 Do you have any pictures of your mounting you can share with the group?

  

 Niko

 40188



 ---

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
Larry Rosen
#40356
N205EN (reserved)
<http>

wayne.e(at)grandecom.net
Guest

Posted: Fri Feb 16, 2007 6:40 am Post subject: Camlocs (was Oil access pannel)

If any of you want photos of the cam lock install  just let me know and I can forward them to you.

  

 Wayne Edgerton #40336

   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

LloydDR(at)wernerco.com
Guest

Posted: Fri Feb 16, 2007 7:17 am Post subject: Camlocs (was Oil access pannel)

I would like them and I am sure many others would too. Can  you send them to Tim and he can post them under the mods section?  

 Tim is this good?

 Dan 

 N289DT



   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Wayne  Edgerton

Sent: Friday, February 16, 2007 9:40 AM

To:  rv10-list(at)matronics.com

Subject: Re: Camlocs (was Oil  access pannel)

 

 If any of you want photos of the cam lock install  just let me know and I can forward them to you.

  

 Wayne Edgerton #40336

[quote]



href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com



[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

gorejr(at)bellsouth.net
Guest

Posted: Fri Feb 16, 2007 7:33 am Post subject: Camlocs (was Oil access pannel)

I would like to see the pics.  Did you use hinges on one side and camlocks?  Jim

 	  Quote: 	
		   

 From: "Lloyd, Daniel R." <LloydDR(at)wernerco.com>

 Date: 2007/02/16 Fri AM 10:17:08 EST

 To: <rv10-list(at)matronics.com>

 Subject: RE: Camlocs (was Oil access pannel)

 

 I would like them and I am sure many others would too. Can you send them

 to Tim and he can post them under the mods section? 

 Tim is this good?

 Dan 

 N289DT

 

   _____  

 

 From: owner-rv10-list-server(at)matronics.com

 [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Wayne

 Edgerton

 Sent: Friday, February 16, 2007 9:40 AM

 To: rv10-list(at)matronics.com

 Subject: Re: Camlocs (was Oil access pannel)

 

 

 If any of you want photos of the cam lock install just let me know and I

 can forward them to you.

  

 Wayne Edgerton #40336

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum