nuckollsr(at)cox.net Guest
|
Posted: Mon Feb 19, 2007 6:08 pm Post subject: Pulse width modulation on linear actuators |
|
|
At 09:02 AM 2/19/2007 -0800, you wrote:
Quote: |
I don't know yet Bob, the spec I gave is from the mfg and I'm sure is worst
case, I imagine in this lightly load application, it will be
>.5 amp.
Thanks, Tim
|
Hmmmm . . . okay, except that inrush currents will be
rather spectacular compared to the load currents.
When you craft a duty-cycle limited controller, I'd
recommend that transistors in the 10A class be used
to drive the motor.
Bob . . .
----------------------------------------
( IF one aspires to be "world class", )
( what ever you do must be exercised )
( EVERY day . . . )
( R. L. Nuckolls III )
----------------------------------------
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|