 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Bill Vincent
Joined: 30 Jan 2006
Posts: 84
|
 Posted: Thu Mar 01, 2007 6:49 pm Post subject: Picture of snow skis |
 |
|
Hi Gang
These are the skis I made for my Kolb. I made them out of old water skis that I had bought at a rummage sale for $10.00. I do not recommend making skis with metal bottoms because they will freeze to the ground.
I also put a stainless steel 3/8 inch rod down the middle of the bottom of the ski, this keeps it from sliding side ways. I made it so that the axel is the same height as the wheel. I find that flying with skis is easier than with wheels, except when the snow is too sticky. Sometimes when I am taking off I have to bounce the skis back onto the runway to knock the snow off of the top of the skis.
Bill Vincent
FS II
Upper Peninsula of Michigan
P.S. Included is a picture of Scott Trask which is Mark III on skis.
Do Not Archive
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
86.08 KB |
| Viewed: |
297 Time(s) |
|
| Description: |
|
| Filesize: |
87.3 KB |
| Viewed: |
282 Time(s) |
|
_________________
Bill Vincent
Firestar II
Upper Peninsula of Michigan |
|
| Back to top |
|
 |
David.Lehman
Joined: 10 Jan 2006
Posts: 265
Location: "Lovely" Fresno CA
|
| Posted: Thu Mar 01, 2007 6:58 pm Post subject: Picture of snow skis |
|
|
Bill...
Like your idea of using rollers for a ramp, never thought of that... Would probably work for floats too...
DVD
do not archive
On 3/1/07, Bill Vincent <emailbill(at)chartermi.net (emailbill(at)chartermi.net)> wrote: | Quote: | Hi Gang
These are the skis I made for my Kolb. I made them out of old water skis that I had bought at a rummage sale for $10.00. I do not recommend making skis with metal bottoms because they will freeze to the ground.
I also put a stainless steel 3/8 inch rod down the middle of the bottom of the ski, this keeps it from sliding side ways. I made it so that the axel is the same height as the wheel. I find that flying with skis is easier than with wheels, except when the snow is too sticky. Sometimes when I am taking off I have to bounce the skis back onto the runway to knock the snow off of the top of the skis.
Bill Vincent
FS II
Upper Peninsula of Michigan
P.S. Included is a picture of Scott Trask which is Mark III on skis.
Do Not Archive
|
--
๔ฟ๔ "I fly because it releases my mind from the tyranny of petty things"...
~Antoine de Saint-Exupery [quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
รดยฟรด
"Both optimists and pessimists contribute to the society. The optimist invents the aeroplane, the pessimist the parachute."
--- George Bernard Shaw |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
