 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jesse(at)saintaviation.co
Guest
|
 Posted: Thu Apr 12, 2007 1:10 pm Post subject: Rosen Sun Visor Group Buy |
 |
|
Sorry for the quality, but I have attached some pictures of our Rosen Sun Visor installation. I am getting a quote on our custom mount from a local machine shop and am getting a quote from Rosen on a group buy for the visors. We tried to find a place on the sides to install a visor, but there just isn’t a good place to put it that won’t block the pilot’s vision when he isn’t using the visor. This is a 3-axis visor, so it can be used to block sun from the pilot or copilot’s front anywhere in the windshield and can also block the pilot’s right or copilot’s left. Unfortunately we couldn’t find any way to block the sun from the pilot’s left or copilot’s right except a suction cup or static cling piece. The visor base would mount on the cabin top using two of the 4 screws that hold the front bar to the cabin top.
Please let me know off the list if you are interested and I will put a list together and let you know when I know how much it would cost. I am hoping to keep it under $200 including the visor (big or small lense) and the custom black-anodized base.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
31.42 KB |
| Viewed: |
419 Time(s) |
|
| Description: |
|
| Filesize: |
31.85 KB |
| Viewed: |
419 Time(s) |
|
| Description: |
|
| Filesize: |
33.92 KB |
| Viewed: |
390 Time(s) |
|
|
|
| Back to top |
|
 |
bhughes(at)qnsi.net
Guest
|
| Posted: Thu Apr 12, 2007 1:49 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Jessie,
At $200 count me in.
Enjoyed our visit at Lockhart.
Bobby Hughes
40116
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Thursday, April 12, 2007 3:08 PM
To: rv10-list(at)matronics.com
Subject: Rosen Sun Visor Group Buy
Sorry for the quality, but I have attached some pictures of our Rosen Sun Visor installation. I am getting a quote on our custom mount from a local machine shop and am getting a quote from Rosen on a group buy for the visors. We tried to find a place on the sides to install a visor, but there just isn’t a good place to put it that won’t block the pilot’s vision when he isn’t using the visor. This is a 3-axis visor, so it can be used to block sun from the pilot or copilot’s front anywhere in the windshield and can also block the pilot’s right or copilot’s left. Unfortunately we couldn’t find any way to block the sun from the pilot’s left or copilot’s right except a suction cup or static cling piece. The visor base would mount on the cabin top using two of the 4 screws that hold the front bar to the cabin top.
Please let me know off the list if you are interested and I will put a list together and let you know when I know how much it would cost. I am hoping to keep it under $200 including the visor (big or small lense) and the custom black-anodized base.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
david555(at)cox.net
Guest
|
| Posted: Thu Apr 12, 2007 2:03 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Count me in. David Boone 40138
[quote] ---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jjessen
Joined: 22 Apr 2006
Posts: 285
Location: OR
|
| Posted: Thu Apr 12, 2007 2:19 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Is that 200 for 1 visor and the mount?
John J
do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of David Boone
Sent: Thursday, April 12, 2007 2:59 PM
To: rv10-list(at)matronics.com
Subject: Re: Rosen Sun Visor Group Buy
Count me in. David Boone 40138
[quote] ---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Thu Apr 12, 2007 2:40 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Yes, that would be one visor and the mount. I am hoping to get it down to the $175 range, but can’t promise yet.
Do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of John Jessen
Sent: Thursday, April 12, 2007 6:19 PM
To: rv10-list(at)matronics.com
Subject: RE: Rosen Sun Visor Group Buy
Is that 200 for 1 visor and the mount?
John J
do not archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of David Boone
Sent: Thursday, April 12, 2007 2:59 PM
To: rv10-list(at)matronics.com
Subject: Re: Rosen Sun Visor Group Buy
Count me in. David Boone 40138
[quote]
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Vern(at)teclabsinc.com
Guest
|
| Posted: Thu Apr 12, 2007 3:14 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Jesse,
In your research, did you look at building a fiberglass epoxy mounting pad on the cabin top with some bolt stubs to mount the visor bracket? If it were placed on the outer top corner on the front window (where car visors mount) it mite allow the visor to cover the side window.
Also by what date do we need to let you know?
Vern Smith (#324 fuselage)
Do not archive | Quote: |
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Thursday, April 12, 2007 3:08 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Rosen Sun Visor Group Buy
Sorry for the quality, but I have attached some pictures of our Rosen Sun Visor installation. I am getting a quote on our custom mount from a local machine shop and am getting a quote from Rosen on a group buy for the visors. We tried to find a place on the sides to install a visor, but there just isn’t a good place to put it that won’t block the pilot’s vision when he isn’t using the visor. This is a 3-axis visor, so it can be used to block sun from the pilot or copilot’s front anywhere in the windshield and can also block the pilot’s right or copilot’s left. Unfortunately we couldn’t find any way to block the sun from the pilot’s left or copilot’s right except a suction cup or static cling piece. The visor base would mount on the cabin top using two of the 4 screws that hold the front bar to the cabin top.
Please let me know off the list if you are interested and I will put a list together and let you know when I know how much it would cost. I am hoping to keep it under $200 including the visor (big or small lense) and the custom black-anodized base.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
| Quote: | | href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com |
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com http://www.matronics.com/Navigator?RV10-List |
0123456
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rene(at)felker.com
Guest
|
| Posted: Thu Apr 12, 2007 5:38 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Jesse, count me in.
Rene' Felker
40322
N423CF
801-721-6080
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Thursday, April 12, 2007 3:08 PM
To: rv10-list(at)matronics.com
Subject: Rosen Sun Visor Group Buy
Sorry for the quality, but I have attached some pictures of our Rosen Sun Visor installation. I am getting a quote on our custom mount from a local machine shop and am getting a quote from Rosen on a group buy for the visors. We tried to find a place on the sides to install a visor, but there just isn’t a good place to put it that won’t block the pilot’s vision when he isn’t using the visor. This is a 3-axis visor, so it can be used to block sun from the pilot or copilot’s front anywhere in the windshield and can also block the pilot’s right or copilot’s left. Unfortunately we couldn’t find any way to block the sun from the pilot’s left or copilot’s right except a suction cup or static cling piece. The visor base would mount on the cabin top using two of the 4 screws that hold the front bar to the cabin top.
Please let me know off the list if you are interested and I will put a list together and let you know when I know how much it would cost. I am hoping to keep it under $200 including the visor (big or small lense) and the custom black-anodized base.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2872
|
| Posted: Thu Apr 12, 2007 6:18 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Interestingly, last year before and after Sun-N-Fun, I had worked with
Mike from Rosen on getting a custom RV-10 system put together. I
created templates, he sent parts, we started to lay out an RV-10 system,
and then they just got too busy and started blowing the RV-10 project
off for other things. At OSH, they said they were still too busy, and
ever since they haven't had time either. But, I did spend some time
getting a design together but they just needed to come up with one
custom bracket and then the RV-10 would be able to have dual visors
that would not only work on boths sides, but could be flipped
completely out of the way too. I was hoping that one day they'd
spend the time to finish up, because it would be a nice system.
From the looks of it, although having one visor is a HUGE improvement,
it's still far from ideal and is a real compromise in quality from
what you'd get with a system in something like a mooney or a
bonanza....so it would be great to see the project taken further.
Rosen did say that they could easily create custom shaped visors, but
they just didn't have the time to make the custom mount that I was
working up for them. My intention is to still go that route, even if
they don't do the mount themselves. I think with them making come
custom shaped visors, it wouldn't be too hard to get someone to make
a quantity of mounts and have a pretty slick RV-10 system. I may have
to get a prototype made though so it can prove itself. Too bad they
don't see the value of the RV-10 market like some companies.
Tim Olson - RV-10 N104CD - Flying
do not archive
Jesse Saint wrote:
[quote] Yes, that would be one visor and the mount. I am hoping to get it down
to the $175 range, but can’t promise yet.
Do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com <mailto:jesse(at)saintaviation.com>
www.saintaviation.com <http://www.saintaviation.com>
Cell: 352-427-0285
Fax: 815-377-3694
------------------------------------------------------------------------
*From:* owner-rv10-list-server(at)matronics.com
[mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *John Jessen
*Sent:* Thursday, April 12, 2007 6:19 PM
*To:* rv10-list(at)matronics.com
*Subject:* RE: Rosen Sun Visor Group Buy
Is that 200 for 1 visor and the mount?
John J
do not archive
------------------------------------------------------------------------
*From:* owner-rv10-list-server(at)matronics.com
[mailto:owner-rv10-list-server(at)matronics.com] *On Behalf Of *David Boone
*Sent:* Thursday, April 12, 2007 2:59 PM
*To:* rv10-list(at)matronics.com
*Subject:* Re: Rosen Sun Visor Group Buy
Count me in. David Boone 40138
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Thu Apr 12, 2007 6:19 pm Post subject: Rosen Sun Visor Group Buy |
|
|
We looked at every place that it could be put and the only place that would not be in the way is right where the pictures show. I thought we could do it on the outer top corners, but that would really be in the way when not in use because the corners don’t go out as far as a car, so your view would be quite limited when not using the visor because it would hang down so far (when putting it far enough out that it wouldn’t be riding on your head). We got both of the Rosen standard mounts and neither of them worked anywhere, so we decided to make our own and it works very well. The main decision is whether to go with a 5x12 inch visor as shown, or a 10x12 inch one, which would provide more protection, but would also be more in the way. The visor can be put up against the cabin top when not in use while flying or when parked and if you have seatbelt and headset hangars like we have, then you can just align it with the bar and it is out of the way when parked.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Vern W. Smith
Sent: Thursday, April 12, 2007 7:14 PM
To: rv10-list(at)matronics.com
Subject: RE: Rosen Sun Visor Group Buy
Jesse,
In your research, did you look at building a fiberglass epoxy mounting pad on the cabin top with some bolt stubs to mount the visor bracket? If it were placed on the outer top corner on the front window (where car visors mount) it mite allow the visor to cover the side window.
Also by what date do we need to let you know?
Vern Smith (#324 fuselage)
Do not archive
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Thu Apr 12, 2007 6:22 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Could anybody who has the bar as it comes from Van’s give me the dimensions between the holes so I can have the machine shop make them at those exact locations? This would help make a better fit for most people, although going to the final size, especially in steel, still wanders around a little bit, which shouldn’t be too big of a problem.
Do not archive
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Vern W. Smith
Sent: Thursday, April 12, 2007 7:14 PM
To: rv10-list(at)matronics.com
Subject: RE: Rosen Sun Visor Group Buy
Jesse,
In your research, did you look at building a fiberglass epoxy mounting pad on the cabin top with some bolt stubs to mount the visor bracket? If it were placed on the outer top corner on the front window (where car visors mount) it mite allow the visor to cover the side window.
Also by what date do we need to let you know?
Vern Smith (#324 fuselage)
Do not archive | Quote: |
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Jesse Saint
Sent: Thursday, April 12, 2007 3:08 PM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Rosen Sun Visor Group Buy
Sorry for the quality, but I have attached some pictures of our Rosen Sun Visor installation. I am getting a quote on our custom mount from a local machine shop and am getting a quote from Rosen on a group buy for the visors. We tried to find a place on the sides to install a visor, but there just isn’t a good place to put it that won’t block the pilot’s vision when he isn’t using the visor. This is a 3-axis visor, so it can be used to block sun from the pilot or copilot’s front anywhere in the windshield and can also block the pilot’s right or copilot’s left. Unfortunately we couldn’t find any way to block the sun from the pilot’s left or copilot’s right except a suction cup or static cling piece. The visor base would mount on the cabin top using two of the 4 screws that hold the front bar to the cabin top.
Please let me know off the list if you are interested and I will put a list together and let you know when I know how much it would cost. I am hoping to keep it under $200 including the visor (big or small lense) and the custom black-anodized base.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
| Quote: | | href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com |
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com http://www.matronics.com/Navigator?RV10-List |
[/b]http://www.matronics.com/Navigator?RV10-Listhttp://forums.matronics.com[/b][quote][b] [b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Jim Berry
Joined: 10 Jan 2006
Posts: 237
Location: Denver
|
| Posted: Thu Apr 12, 2007 7:24 pm Post subject: Re: Rosen Sun Visor Group Buy |
|
|
Jesse,
The holes on my brace are 3/4" ctc in both axes. And please put me down for a set also.
Jim Berry
40482 Finishing
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
ddddsp1(at)juno.com
Guest
|
| Posted: Thu Apr 12, 2007 7:48 pm Post subject: Rosen Sun Visor Group Buy |
|
|
I saw a RV10 with Rosen mounts in the outer corners.........the mount bolts go thru the door channel. Visors swing to cover the windshield or rotate to cover the door windows. I did not care for more screws in the door channels BUT it is better than thru the cabin top or only having ONE visor.
Dean 40449
P.S. Anyone putting UHMV tape over the top of the cowl where the top cowl pins are to protect the paint when inserting the pins? Also considering putting it on the front of the cowl around the spinner hole to protect the paint when removing or putting the lower/upper cowl on. Hate to rub it against the spinner and scratch the paint ..........thinking that clear UHMV tape would help and not detract from the looks?
________________________________________________________________________
Interested in getting caught up on today's news?
Click here to checkout USA TODAY Headlines.
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flysrv10(at)gmail.com
Guest
|
| Posted: Fri Apr 13, 2007 3:41 am Post subject: Rosen Sun Visor Group Buy |
|
|
To take the cowl on and off, place a terry cloth rag between the cowl and the spinner. It works well for me.
do not archive
On Apr 13, 2007, at 3:45 AM, ddddsp1(at)juno.com (ddddsp1(at)juno.com) wrote:
[quote]
I saw a RV10 with Rosen mounts in the outer corners.........the mount bolts go thru the door channel. Visors swing to cover the windshield or rotate to cover the door windows. I did not care for more screws in the door channels BUT it is better than thru the cabin top or only having ONE visor.
Dean 40449
P.S. Anyone putting UHMV tape over the top of the cowl where the top cowl pins are to protect the paint when inserting the pins? Also considering putting it on the front of the cowl around the spinner hole to protect the paint when removing or putting the lower/upper cowl on. Hate to rub it against the spinner and scratch the paint ...........thinking that clear UHMV tape would help and not detract from the looks?
________________________________________________________________________
Interested in getting caught up on today's news?
Click here to checkout USA TODAY Headlines.
| Quote: |
href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List
href="http://forums.matronics.com">http://forums.matronics.com
|
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Fri Apr 13, 2007 6:16 am Post subject: Rosen Sun Visor Group Buy |
|
|
Or a piece of masking tape (preferably the green or blue stuff), which you take right back off.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com (jesse(at)saintaviation.com)
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Rob Kermanj
Sent: Friday, April 13, 2007 7:40 AM
To: rv10-list(at)matronics.com
Subject: Re: Rosen Sun Visor Group Buy
To take the cowl on and off, place a terry cloth rag between the cowl and the spinner. It works well for me.
do not archive
On Apr 13, 2007, at 3:45 AM, ddddsp1(at)juno.com (ddddsp1(at)juno.com) wrote:
I saw a RV10 with Rosen mounts in the outer corners.........the mount bolts go thru the door channel. Visors swing to cover the windshield or rotate to cover the door windows. I did not care for more screws in the door channels BUT it is better than thru the cabin top or only having ONE visor.
Dean 40449
P.S. Anyone putting UHMV tape over the top of the cowl where the top cowl pins are to protect the paint when inserting the pins? Also considering putting it on the front of the cowl around the spinner hole to protect the paint when removing or putting the lower/upper cowl on. Hate to rub it against the spinner and scratch the paint ...........thinking that clear UHMV tape would help and not detract from the looks?
________________________________________________________________________
Interested in getting caught up on today's news?
Click here to checkout USA TODAY Headlines. | Quote: | | href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-Listhref="http://forums.matronics.com">http://forums.matronics.com |
[quote] [b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Fri Apr 13, 2007 6:46 am Post subject: Rosen Sun Visor Group Buy |
|
|
If I or anybody else comes out with a way to mount it on the outside
corners, it would be easy to get another visor and put the first one and the
new one on the outside corners. The mount would then not be useable, but
the new mount would replace it anyway. We could have put it on the outside
corners with screws through the door channel, but the problem is that it
would be in the way quite a bit with no way to get it completely out of the
way so it didn't obstruct visibility.
Do not archive.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
KiloPapa
Joined: 24 May 2006
Posts: 142
Location: Pearblossom, CA
|
| Posted: Fri Apr 13, 2007 3:46 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Have you looked at a center mount that would allow 2 visors
to hang from it, one for each side?
Kevin
40494
| Quote: |
<jesse(at)saintaviation.com>
If I or anybody else comes out with a way to mount it on
the outside corners, it would be easy to get another visor
and put the first one and the new one on the outside
corners. The mount would then not be useable, but the new
mount would replace it anyway. We could have put it on the
outside corners with screws through the door channel, but
the problem is that it would be in the way quite a bit with
no way to get it completely out of the way so it didn't
obstruct visibility.
Do not archive.
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kevin
40494
do not archive |
|
| Back to top |
|
|
jesse(at)saintaviation.co
Guest
|
| Posted: Sun Apr 15, 2007 1:33 pm Post subject: Rosen Sun Visor Group Buy |
|
|
That could be done without too much trouble, probably. I could talk to the
machinist and design a base. The single visor will cover both sides, just
not both at the same time, so whoever is flying can use it. How many would
be interested in this setup? I have 20 people now who want the visor, so
that gets into a half-decent price for the base. Doing a double base would
probably take the kit with two visors to about $350 or so.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
GenGrumpy(at)aol.com
Guest
|
| Posted: Sun Apr 15, 2007 6:16 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Sign me up for the dual!
grumpy
40404
DO NOT ARCHIVE
In a message dated 4/15/2007 4:36:40 PM Central Standard Time, jesse(at)saintaviation.com writes:
[quote]--> RV10-List message posted by: "Jesse Saint" <jesse(at)saintaviation.com>
That could be done without too much trouble, probably. I could talk to the
machinist and design a base. The single visor will cover both sides, just
not both at the same time, so whoever is flying can use it. How many would
be interested in this setup? I have 20 people now who want the visor, so
that gets into a half-decent price for the base. Doing a double base would
probably take the kit with two visors to about $350 or so.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rene(at)felker.com
Guest
|
| Posted: Sun Apr 15, 2007 6:50 pm Post subject: Rosen Sun Visor Group Buy |
|
|
Jesse, sign me up for the dual.......I can not get away with having anything
on my side of the airplane that my wife does not have on her side.....it is
why I have a dual screen GRT and a BMA Lite....button for her to push.
Rene'
801-721-6080
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
roy.debbie(at)cox.net
Guest
|
| Posted: Mon Apr 16, 2007 2:02 am Post subject: Rosen Sun Visor Group Buy |
|
|
Jesse: I am interested in the dual setup. Roy Russell
---- Jesse Saint <jesse(at)saintaviation.com> wrote:
[quote]
That could be done without too much trouble, probably. I could talk to the
machinist and design a base. The single visor will cover both sides, just
not both at the same time, so whoever is flying can use it. How many would
be interested in this setup? I have 20 people now who want the visor, so
that gets into a half-decent price for the base. Doing a double base would
probably take the kit with two visors to about $350 or so.
Jesse Saint
Saint Aviation, Inc.
jesse(at)saintaviation.com
www.saintaviation.com
Cell: 352-427-0285
Fax: 815-377-3694
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
