BobsV35B(at)aol.com Guest
|
Posted: Thu May 31, 2007 7:35 pm Post subject: Grimes Pin Outs and Installation Wiring. |
|
|
Good Evening All,
I have a Grimes P/N G-9950-1 Oscillating Beacon and a Grimes P/N 5530 Retractable Landing Light which I would like to install. I suppose if I were a sharper electrician I could figure out which wire goes where, but if anyone could steer me to a pin out and/or the installation instructions for either or both of these units I would sure be grateful.
The Oscillating Beacon has a Cannon style three pin plug receptacle which is about one half inch in diameter. It has some labeling near the pins. May be A, B and C, but I really can't tell for sure.
The landing light has a three pin receptacle which is about one inch in diameter and that one is definitely labeled A, B and C.
Happy Skies,
Old Bob
AKA
Bob Siegfried
Ancient Aviator
Stearman N3977A
Brookeridge Air Park LL22
Downers Grove, IL 60516
630 985-8503
See what's free at AOL.com.
[quote][b]
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|