Matronics Email Lists :: View topic - Flap Actuator Mount question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Flap Actuator Mount question

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

johnd(at)data-tech.com
Guest

Posted: Thu May 31, 2007 9:16 am Post subject: Flap Actuator Mount question

Hi,



I have a 601XL quickbuild which has come with a newer Flap actuator than 

the mount (6B19-10) was designed for, in particular the width of the 

tabs on the mount through which the actuator itself bolts is much bigger 

than the new actuator needs.



Can I use the current mount (which is already in place) and use spacers 

on the longer bolt between the edges of the flap actuator and the mount 

to keep it from moving horizontally or should I really replace the mount 

with the proper one. Oddly enough the kit did come with the proper one 

loose but the one thats installed has the wider spacing.



Thoughts ?



Thanks,

John Davis

Burnsville, NC



601XL QB - Jab 3300

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

DaveG601XL

Joined: 27 Oct 2006
Posts: 351
Location: Cincinnati, Oh

Posted: Thu May 31, 2007 11:01 am Post subject: Re: Flap Actuator Mount question

Personally it would not bother me a bit if the space you needed to take up was only a few washers worth.  Ask your Tech Counselor or ZAC.  I have the new actuator and bracket so I don't know how wide the original was.



Good Luck.

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
David Gallagher
Cincinnati, OH area

dredmoody(at)cox.net
Guest

Posted: Thu May 31, 2007 4:45 pm Post subject: Flap Actuator Mount question

My guess is that you should use the loose proper fitting one. Have you contacted the factory about it yet?



Dred

Do Not Archive



---- John Davis <johnd(at)data-tech.com> wrote: 

 	  Quote: 	
		   

 

 Hi,

 

 I have a 601XL quickbuild which has come with a newer Flap actuator than 

 the mount (6B19-10) was designed for, in particular the width of the 

 tabs on the mount through which the actuator itself bolts is much bigger 

 than the new actuator needs.

 

 Can I use the current mount (which is already in place) and use spacers 

 on the longer bolt between the edges of the flap actuator and the mount 

 to keep it from moving horizontally or should I really replace the mount 

 with the proper one. Oddly enough the kit did come with the proper one 

 loose but the one thats installed has the wider spacing.

 

 Thoughts ?

 

 Thanks,

 John Davis

 Burnsville, NC

 

 601XL QB - Jab 3300

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum