Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Spinner Survey

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

cpayne(at)joimail.com
Guest

Posted: Mon Jun 11, 2007 12:05 pm Post subject: Spinner Survey

Ever since I was a small boy, flying with my father in surplus warbirds, I have had this thing about large, well formed propeller spinners.  At this stage in my life, I'm not worried about why  this is so, nor am I seeking cyber-therapy so spare me please. The Crowder I have on my CJ now receives regular waxing and polishing - Hmmm. However my purpose here is to seek out others with a similiar afflictation whom may be interested in obtaining a competitively priced, metal spinner that I am designing.

  

 Another affliction of mine is I can't stop making "stuff" for airplanes of all sorts and I can't seem to leave well-enough alone; sigh.

  

 My proposed spinner will be smaller than the 24" diameter Crowder but larger than the 16-1/2" Yak-18T fiberglass spinner (I have both). If others were interested, my development cost could be spread over a small batch run. I have improved my Crowder somewhat but a re-design is what I'm really looking at. Mounting plates would be available for the M-14P flange, Housai prop hub, and eventually, the SAE flange used on MT props. Another possibility is to use my tooling for a carbon-fiber shell over the metal mounting structure.

  

 Reply to my email for a show of interest. My time-line on this is a small production run in 6 -  8 months, as some work will be sublet.

  

 Craig Payne

 cpayne(at)joimail.com (cpayne(at)joimail.com)

  

  

 

  [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

viperdoc(at)mindspring.co
Guest

Posted: Mon Jun 11, 2007 1:18 pm Post subject: Spinner Survey

Craig,  

Throw my name in. I put my 18T spinner on the 52 and am thinking about on for the 50.  

Doc  

       

From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Craig Payne

 Sent: Monday, June 11, 2007 3:06 PM

 To: yak-list

 Subject: Spinner Survey  

  

  

     

Ever since I was a small boy, flying with my father in surplus warbirds, I have had this thing about large, well formed propeller spinners.  At this stage in my life, I'm not worried about why  this is so, nor am I seeking cyber-therapy so spare me please. The Crowder I have on my CJ now receives regular waxing and polishing - Hmmm. However my purpose here is to seek out others with a similiar afflictation whom may be interested in obtaining a competitively priced, metal spinner that I am designing.  

    

   

    

Another affliction of mine is I can't stop making "stuff" for airplanes of all sorts and I can't seem to leave well-enough alone; sigh.  

    

   

    

My proposed spinner will be smaller than the 24" diameter Crowder but larger than the 16-1/2" Yak-18T fiberglass spinner (I have both). If others were interested, my development cost could be spread over a small batch run. I have improved my Crowder somewhat but a re-design is what I'm really looking at. Mounting plates would be available for the M-14P flange, Housai prop hub, and eventually, the SAE flange used on MT props. Another possibility is to use my tooling for a carbon-fiber shell over the metal mounting structure.  

    

   

    

Reply to my email for a show of interest. My time-line on this is a small production run in 6 -  8 months, as some work will be sublet.  

    

   

    

Craig Payne  

    

cpayne(at)joimail.com (cpayne(at)joimail.com)  

    

   

    

   

   	  Quote: 	
		    http://www.matronics.com/Navigator?Yak-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4

        [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

rogerbyak(at)yahoo.com
Guest

Posted: Mon Jun 11, 2007 5:02 pm Post subject: Spinner Survey

I'm interested.  What would it do to speed and cooling?  rb



Craig Payne <cpayne(at)joimail.com> wrote:  [quote]      Ever since I was a small boy, flying with my father in surplus warbirds, I have had this thing about large, well formed propeller spinners.  At this stage in my life, I'm not worried about why  this is so, nor am I seeking cyber-therapy so spare me please. The Crowder I have on my CJ now receives regular waxing and polishing - Hmmm. However my purpose here is to seek out others with a similiar afflictation whom may be interested in obtaining a competitively priced, metal spinner that I am designing.

   

  Another affliction of mine is I can't stop making "stuff" for airplanes of all sorts and I can't seem  to leave well-enough alone; sigh.

   

  My proposed spinner will be smaller than the 24" diameter Crowder but larger than the 16-1/2" Yak-18T fiberglass spinner (I have both). If others were interested, my development cost could be spread over a small batch run. I have improved my Crowder somewhat but a re-design is what I'm really looking at. Mounting plates would be available for the M-14P flange, Housai prop hub, and eventually, the SAE flange used on MT props. Another possibility is to use my tooling for a carbon-fiber shell over the metal mounting structure.

   

  Reply to my email for a show of interest. My time-line on this is a small production run in 6 -  8 months, as some work will be sublet.

   

  Craig Payne

  cpayne(at)joimail.com (cpayne(at)joimail.com)

   

   

  

[quote][b]Shape Yahoo! in your own image.   [url=http://us.rd.yahoo.com/evt=48517/*http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7]Join our Network Research Panel today![/url]  [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum