Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Firewall Forward

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

dlm46007(at)cox.net
Guest

Posted: Sun Jun 17, 2007 6:10 pm Post subject: Firewall Forward

Don't be surprised if the AN823-8D and AN822-8D do not turn into the oil

cooler. Mine turned about 3/4 turn. The tool you need is #91395 from Harbor

Freight ($10-20). The set contains a 3/8"-18 NPT tap. Hold the oil cooler in

a vise by the flange and tap up into the hole. Use thick grease on the tap

so that any shavings are trapped in the grease at the flutes. Tap slowly 1/2

forward, then 1/4 back then 1/2 forward again. When satisfied with the depth

of the tap clean the oil cooler threads with cotton buds dipped in acetone.

When finished then rinse the oil cooler internally with mineral spirits.

Fuel lube the AN parts and mount.

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum