Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wire Book for RV-10

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

orchidman

Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE

Posted: Thu Jun 28, 2007 6:34 pm Post subject: Wire Book for RV-10

Bob Nuckolls of AeroElectric has a sample wire book for a Lancair.  Has anyone made one for the RV-10?  Or 7 or 9?

If anyone knows of one, it sure would help getting me down the road or runway quicker.

_________________
Gary Blankenbiller
RV10 - # 40674
(N2GB Flying)

AirMike

Joined: 27 Feb 2007
Posts: 514
Location: Nevada

Posted: Fri Jun 29, 2007 3:19 am Post subject: Wire Book for RV-10

I bought the wiring kit from Vans. It is expensive, but it provides the basic wiring for the RV10 including a pre-cut and rigged harness that covers all of your basic wiring needs (as they say for a VFR airplane.) It also includes instructions, but not a description of what & why

     It all fit in quite flawlessly. I was quite impressed.   I do not know didley about wiring and elecrical stuff, but my IA friend brought me up to speed on what I was doing and assisted me with the installation. I also rigged my static line at the same time and threw some conduit in under the rear seats and baggage area for later additions.

     The kit also includes the dreaded #2 wire from the battery to the solenoid on the firewall. All in all, I probably saved 2 weeks on the electrical system - time will tell, but my IA friend gave me confidence that the kit did the job.

      With some trepidation I have buttoned up the baggage area and moved on to the control stuff.     Hope to fly to OSH next year

_________________
See you OSH '18
Q/B - sold.

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Fri Jun 29, 2007 3:21 am Post subject: Wire Book for RV-10

The link on Bob's site for this is broken.  Can you forward a copy off list?



Our EAA Chapter is sponsoring Bob's seminar in December at KOSU.  This is on

my to do list, but haven't started activities yet other than to add it to

the myriad of other task yet to be started.



--

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

jwt(at)roadmapscoaching.c
Guest

Posted: Fri Jun 29, 2007 4:51 am Post subject: Wire Book for RV-10

Here is my wirebook.  Feel free to use it as a start.



Take care,

John

_________________________________

John Testement

RoadMaps Consulting / SportsMind

Please visit our website at roadmapscoaching.com

Phone: 804-303-1927

Email: john(at)roadmapscoaching.com

3204 Long Meadow Cir.

Glen Allen, VA 23059



 



--

RV-10_Wire_Book-Load_Analysis_V2.xls

Description:

Download

Filename:

RV-10_Wire_Book-Load_Analysis_V2.xls

Filesize:

305 KB

Downloaded:

565 Time(s)

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Fri Jun 29, 2007 5:50 am Post subject: Wire Book for RV-10

An excellent contribution to the build effort.  



Thanks



John Cox



--

orchidman

Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE

Posted: Fri Jun 29, 2007 6:14 am Post subject: Re: Wire Book for RV-10

Guess I needed to be more specific.  There are 2 samples on the AeroElectronic CD that are labeled â€˜Wire Bookâ€™ that are about 30 pages of wiring diagrams.  They are printable into a book form with a basic wiring diagram similar to what we see from many people plus other detailed diagrams with finer details of each segment or component.



Has anyone done one of these for the â€“10?  Before you do a complete load analysis or inventory of all components, you need a complete and detailed wiring diagram.

_________________
Gary Blankenbiller
RV10 - # 40674
(N2GB Flying)

planesmith(at)hotmail.com
Guest

Posted: Fri Jun 29, 2007 1:08 pm Post subject: Wire Book for RV-10

Gary,

  

 There is a downloadable schematic for a RV7A at the following link: http://www.matronics.com/photoshare/SMITHBKN(at)aol.com.12.25.2005/ it is under the title "Peer review Electrical.xls"



 It's based on a two battery/one alternator system with fuses (but breakers could be substituted.) It may give you some ideas. The cool thing is it is all in Excel and still you can manipulate the drawing without a CAD system.

  

 Vern Smith (#324 fuselage)

  

  

 	  Quote: 	
		   Subject: Re: Wire Book for RV-10

 From: gary(at)wingscc.com

 Date: Fri, 29 Jun 2007 07:14:18 -0700

 To: rv10-list(at)matronics.com

 

 --> RV10-List message posted by: "orchidman" <gary(at)wingscc.com>

 

 Guess I needed to be more specific. There are 2 samples on the AeroElectronic CD that are labeled â€˜Wire Bookâ€™ that are about 30 pages of wiring diagrams. They are printable into a book form with a basic wiring diagram similar to what we see from many people plus other detailed diagrams with finer details of each segment or component.

 

 Has anyone done one of these for the â€“10? Before you do a complete load analysis or inventory of all components, you need a complete and detailed wiring diagram.

 

 --------

 Gary Blankenbiller

 RV10 - # 40674

 (N410GB reserved)

 do not archive

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=121205#121205

 

 

 

&g========================> 
	


 	  Quote: 	
		   

 


	


Play free games, earn tickets, get cool prizes! Join Live Search Club.   Join Live Search Club!  [quote][b]

carlosh(at)sec-engr.com
Guest

Posted: Fri Jun 29, 2007 1:39 pm Post subject: Wire Book for RV-10

Vernon Smith wrote:

 	  Quote: 	
		   Gary,

  

 There is a downloadable schematic for a RV7A at the following link: 

 http://www.matronics.com/photoshare/SMITHBKN(at)aol.com.12.25.2005/ it is 

 under the title "Peer review Electrical.xls"



 It's based on a two battery/one alternator system with fuses (but 

 breakers could be substituted.) It may give you some ideas. The cool 

 thing is it is all in Excel and still you can manipulate the drawing 

 without a CAD system.

  

 Vern Smith (#324 fuselage)

  

  

 > Subject: Re: Wire Book for RV-10

 > From: gary(at)wingscc.com

 > Date: Fri, 29 Jun 2007 07:14:18 -0700

 > To: rv10-list(at)matronics.com

 >

 > 

 >

 > Guess I needed to be more specific. There are 2 samples on the 

 AeroElectronic CD that are labeled â€˜Wire Bookâ€™ that are about 30 

 pages of wiring diagrams. They are printable into a book form with a 

 basic wiring diagram similar to what we see from many people plus 

 other detailed diagrams with finer details of each segment or component.

 >

 > Has anyone done one of these for the â€“10? Before you do a complete 

 load analysis or inventory of all components, you need a complete and 

 detailed wiring diagram.

 >

 > --------

 > Gary Blankenbiller

 > RV10 - # 40674

 > (N410GB reserved)

 > do not archive

 >

 >

 >

 >

 > Read this topic online here:

 >

 > http://forums.matronics.com/viewtopic.php?p=121205#121205

 >

 >

 >

 &g========================

 >

 >

 >

 ------------------------------------------------------------------------

 Play free games, earn tickets, get cool prizes! Join Live Search 

 Club.   Join Live Search Club! 

 <http://club.live.com/home.aspx?icid=CLUB_wlmailtextlink>

 *

 *

 ------------------------------------------------------------------------



   

Saved that one for later! Thanks Vern!!
	




Carlos in AZ

RV-7A N174PP-reserved



Do Not Archive



-- 

Carlos Hernandez <carlosh(at)sec-engr.com>

Structural Engineers, LLC

2963 W. Elliot Rd. - Suite 3

Chandler, AZ 85224

Phone: 480.968.8600

Fax: 480.968.8608

www.sec-engr.com

CONFIDENTIALITY NOTICE



The information in this email may be confidential and/or privileged.

This email is intended to be reviewed by only the individual or

organization named above. If you are not the intended recipient or

an authorized representative of the intended recipient, you are hereby

notified that any review, dissemination or copyingof this email and

its attachments, if any, or the information contained herein is

prohibited. If you havereceived this email in error, please

immediately notify the sender by return email and delete this email

from your system.

orchidman

Joined: 10 Jul 2006
Posts: 277
Location: Oklahoma City - KRCE

Posted: Fri Jun 29, 2007 7:34 pm Post subject: Re: Wire Book for RV-10

 	  planesmith(at)hotmail.com wrote: 	
		  Gary,

  

 There is a downloadable schematic for a RV7A at the following link: http://www.matronics.com/photoshare/SMITHBKN(at)aol.com.12.25.2005/ it is under the title "Peer review Electrical.xls"



 It's based on a two battery/one alternator system with fuses (but breakers could be substituted.) It may give you some ideas. The cool thing is it is all in Excel and still you can manipulate the drawing without a CAD system.

  

 Vern Smith (#324 fuselage)

  	


Vern,

The link doesn't seem to work for me.

Gary

_________________
Gary Blankenbiller
RV10 - # 40674
(N2GB Flying)

planesmith(at)hotmail.com
Guest

Posted: Sat Jun 30, 2007 6:28 am Post subject: Wire Book for RV-10

Not sure why the link didn't work. So let's try this, the file is attached. 

 I think between this spreadsheet, the Aeroelectric book, and the spreadsheet John T. was willing to share (thanks John:) you will have a good starting point. Tim Olsen has some great information on his site. Plus if you are registered with him as a builder he has a pdf of Van's electrical system for reference. Also, Tim has a cool addition on his panel page about the philosophy of designing IFR panels.  

 The effort and work Tim and others like him have put into helping the RV 10 community is truly amazing! My only hope is that when I grow up I can pay back a small portion of what I have received from the group.

 Vern 

 	  Quote: 	
		   Subject: Re: Wire Book for RV-10

 From: gary(at)wingscc.com

 Date: Fri, 29 Jun 2007 20:34:47 -0700

 To: rv10-list(at)matronics.com

 --> RV10-List message posted by: 'orchidman' <gary(at)wingscc.com>

 planesmith(at)hotmail.com wrote:

 > Gary,

 > 

 > There is a downloadable schematic for a RV7A at the following link: http://www.matronics.com/photoshare/SMITHBKN(at)aol.com.12.25.2005/ (http://www.matronics.com/photoshare/SMITHBKN(at)aol.com.12.25.2005/) it is under the title 'Peer review Electrical.xls'

 > 

 > It's based on a two battery/one alternator system with fuses (but breakers could be substituted.) It may give you some ideas. The cool thing is it is all in Excel and still you can manipulate the drawing without a CAD system.

 > 

 > Vern Smith (#324 fuselage)

 > 

 Vern,

 The link doesn't seem to work for me.

 Gary

 --------

 Gary Blankenbiller

 RV10 - # 40674

 (N410GB reserved)

 do not archive

 Read this topic online here:

 http://forums.matronics.com/viewtopic.php?p=121300#121300

&gt======================

 	  Quote: 	

Play free games, earn tickets, get cool prizes! Join Live Search Club.   Join Live Search Club!

Peer_Review_Electrical.xls

Description:

Download

Filename:

Peer_Review_Electrical.xls

Filesize:

308 KB

Downloaded:

372 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum