Matronics Email Lists :: View topic - Old Kolb Wing Rib Reinforcement

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Old Kolb Wing Rib Reinforcement

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

kcooper(at)ptd.net
Guest

Posted: Sat Feb 11, 2006 9:26 pm Post subject: Old Kolb Wing Rib Reinforcement

Fellow Kolbers,



Started wing assembly today on my Old Kolb Slingshot after a really, really,

really long delay (do planes still have wings?) and could use some advice.

I=92ve got a blueprint page showing the additional =BE=94 angle reinforcement on

the outer rib, with no mention in the instructions. Unfortunately, there

isn=92t enough =BE=94 angle to do the job. Got no problem ordering more. There is,

however, 48 feet of =BD=94 angle that isn=92t mentioned anywhere in the prints or

instructions. I assume it=92s for additional reinforcement of the remaining

ribs (or maybe a trailer to haul it) and have been trying to figure out how

much and where. I would have enough to run along the bottoms but wonder if a

diagonal would add more strength. Anybody have any ideas/plans that show?



Thanks, =91Coop=92 in PA

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum