Matronics Email Lists :: View topic - Mag and Lightspeed ignition grounding

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Mag and Lightspeed ignition grounding

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

air.peter(at)googlemail.c
Guest

Posted: Sun Jul 08, 2007 2:09 pm Post subject: Mag and Lightspeed ignition grounding

Hello all, 



I am wiring my panel and actually the ignition switch, contacting the mag and the Lightspeed to the latter. 

My question is the following: As to my best knowledge the shield from the Mag wire should not be contacted with ground at the switch, the shield from the Lightspeed cable will be contacted to ground at the switch. Is this working (long term), as the Mag will be shortened with the ground from the Lightspeed ? 

Or may I contact the ground from the mag together with the ground from the Lightspeed (ground loop !) ?

Thanks for your help



Peter Lancair 360 (85%)

  [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum