johnwigney(at)alltel.net
Guest
|
 Posted: Sat Jul 07, 2007 1:51 pm Post subject: Fuel hose |
 |
|
Dear Europaphiles,
This is the article on fuel hose which refers to the properties of SAE 30R9 hose which is available in the US at NAPA and Autozone stores.stores.
See http://www.gates.com/common/downloads/files/Gates/brochure/TechTipsForm.pdf
Cheers, John
N262WF, mono XS, 912S
Mooresville, North Carolina
ORIGINAL MESSAGE
<>Subject: Re: N81EU incident - the culprit
From: "danbish" <danbish(at)norwalktucson.com> (danbish(at)norwalktucson.com)
Richard,
I found a post on the EAA site some time ago about using Gates R9 fuel injection
hose instead of the standard stuff which is usually sold in the states as R7,
or some variance thereof. The R9 has a Teflon sheath inside the line that is
supposed to be much more long lasting and theoretically wouldn't have to be replaced
as often. I used it everywhere I had a need for 1/4" or 3/8" hose that
was too tight to use versatube aluminum or where I had a need for 1/2" hose (just
at the pumps) since I was unable to locate R9 in 1/2".
But it ain't cheap; about $8 a foot.
Dan</>
[quote][b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
