Matronics Email Lists :: View topic - Gretz LED indicator dimensions

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Gretz LED indicator dimensions

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Mon Jul 09, 2007 9:52 am Post subject: Gretz LED indicator dimensions

I would like to drill the holes in the panel for the Gretz heated pitot 

LED lights. Mine are stored in a friends hanger not immediately 

accessible. So I'm hoping that someone might have theirs handy and could 

take some measurements. Here's what I need:



1. The diameter of the LED's

2. The spacing of the LED's i.e. how far (center to center) are the 

outside LED's spaced from the center LED?



Appreciate any response/help



Deems Davis # 406

Engine / Wiring and Panel Stuff

http://deemsrv10.com/

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

speckter(at)comcast.net
Guest

Posted: Mon Jul 09, 2007 10:15 am Post subject: Gretz LED indicator dimensions

3 holes 5/32 apart.  The bulbs have a small flange on the bottom that has a

dia of 7/32.  However the bulb itself is 3/16.



Hope that helps

Gary

40274 Fighting with instrument wireing.



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Mon Jul 09, 2007 10:57 am Post subject: Gretz LED indicator dimensions

Gary, Thanks for the quick response, just to double check, is the 

spacing edge to edge on the 3 holes?



Deems Davis # 406

Engine / Wiring and Panel Stuff

http://deemsrv10.com/



gary wrote:

[quote] 



 3 holes 5/32 apart.  The bulbs have a small flange on the bottom that has a

 dia of 7/32.  However the bulb itself is 3/16.



 Hope that helps

 Gary

 40274 Fighting with instrument wireing.



 --

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

speckter(at)comcast.net
Guest

Posted: Mon Jul 09, 2007 11:29 am Post subject: Gretz LED indicator dimensions

Yes Left edge to left edge, or center to center however you like it but not

right edge to left edge.  Does that make any sense.  Just figure center to

center and you will have it.

Gary



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Mon Jul 09, 2007 12:46 pm Post subject: Gretz LED indicator dimensions

I'm pretty dense but something's not computing here for me:



If the diameter of the portion of the bulb that will project through the 

panel is 3/16" (6/32") then 2 bulbs placed side by side would have a 

'center to center' measurement of  6/32"... right?

So how can the center to center measurement be less than this??? Is it 3 

holes 5/16" apart???



I'm obviously missing something.

Deems Davis # 406

Engine / Wiring and Panel Stuff

http://deemsrv10.com/



gary wrote:

[quote] 



 Yes Left edge to left edge, or center to center however you like it but not

 right edge to left edge.  Does that make any sense.  Just figure center to

 center and you will have it.

 Gary



 --

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

speckter(at)comcast.net
Guest

Posted: Mon Jul 09, 2007 2:24 pm Post subject: Gretz LED indicator dimensions

3 holes 5/32 apart.

Sorry for the confusion.

Gary



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum