Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

new/old Kolber

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

Thom Riddle

Joined: 10 Jan 2006
Posts: 1597
Location: Buffalo, NY, USA (9G0)

Posted: Wed Jul 11, 2007 6:26 am Post subject: new/old Kolber

Fellow Kolbers,



After attending Homer's fly-in I could not resist the temptation to get a Kolb, again. I bought the early Firestar from Erik Grabowski that he bought from Bryan Green who rebuilt it when he bought it from who-knows-who. I also bought the trailer/mobile hangar, which I will no longer need after delivering the FS to our hangar. So, I will have a Kolb hauling enclosed trailer for sale very soon. When I do, I'll post specs etc.



For those who have not seen it, a photo is attached.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

197BG rt frnt qrtr.jpg

Description:

Filesize:

89.08 KB

Viewed:

409 Time(s)

_________________
Thom Riddle
Buffalo, NY (9G0)

Don't worry about old age... it doesn't last very long.
- Anonymous

olendorf

Joined: 06 Jul 2006
Posts: 140
Location: Schenectady, NY USA

Posted: Wed Jul 11, 2007 7:21 am Post subject: Re: new/old Kolber

Welcome back to the good side Thom.  That looks like a nice plane.  We should meet up somewhere in the middle of the state some time.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Scott Olendorf
Original Firestar, Rotax 447, Powerfin prop
Schenectady, NY
http://sites.google.com/site/kolbfirestar/

Thom Riddle

Joined: 10 Jan 2006
Posts: 1597
Location: Buffalo, NY, USA (9G0)

Posted: Wed Jul 11, 2007 7:28 am Post subject: Re: new/old Kolber

Scott,



I first have to build an tail dolly for moving it around in the hangar behind the Allegro. I'll have to fold and unfold the wings at each flight so I'm planning on designing a dolly that will hold the wings such the the wing tips are above the flying wires on the tail so I won't have to fold the tail with each flight.



At any rate, once I get used to the FS again, I'll give you a holler. Maybe you and Bob Bean and Bob Erb  and other Kolbers and I can make a little Kolb reunion flight somewhere in the mid-upstate area.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Thom Riddle
Buffalo, NY (9G0)

Don't worry about old age... it doesn't last very long.
- Anonymous

d-m-hague(at)comcast.net
Guest

Posted: Wed Jul 11, 2007 9:23 am Post subject: new/old Kolber

At 11:28 AM 7/11/2007, Thom Riddle wrote:

 	  Quote: 	
		  



Scott,



I first have to build an tail dolly for moving it around in the hangar 

behind the Allegro. I'll have to fold and unfold the wings at each flight 

so I'm planning on designing a dolly that will hold the wings such the the 

wing tips are above the flying wires on the tail so I won't have to fold 

the tail with each flight...


	


I LIKE that idea!  Gotta see if I can do something like that for my US, if 

I end up sharing a hangar instead of keeping it in the trailer.  'Course on 

the US I'd have to partially fold the wings, keeping them outboard of the 

stabilizer, but same idea.



                                 -Dana



--

--

The only correct outcome to an armed robbery attempt is a dead armed robber.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Thom Riddle

Joined: 10 Jan 2006
Posts: 1597
Location: Buffalo, NY, USA (9G0)

Posted: Wed Jul 11, 2007 10:01 am Post subject: Re: new/old Kolber

Dana,



The space available to me for the FS precludes leaving the wings low and wide to clear the horizontal stabilizer tips, so I have to tilt them up to keep them within the width of the stabilizer. It should be simple to do and I have a plan in my head. I hope to get it done within a couple days. If it works out well, I'll take some photos and post them.

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Thom Riddle
Buffalo, NY (9G0)

Don't worry about old age... it doesn't last very long.
- Anonymous

grabo172

Joined: 10 Oct 2006
Posts: 32
Location: Beaver, OH

Posted: Wed Jul 11, 2007 12:10 pm Post subject: Re: new/old Kolber

After a bunch of fuss with the tail light on the trailer I saw my good old N197BG drive away with Thom...



Take good care of her!



Hope you love it as much as I did!  But Time for me to move up...  MKIII xtra would be a great find when I get ready for the next plane.



-Erik

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
-Erik Grabowski
N?????
CFI/CFII/LS-I

Thom Riddle

Joined: 10 Jan 2006
Posts: 1597
Location: Buffalo, NY, USA (9G0)

Posted: Fri Jul 13, 2007 8:39 am Post subject: tail dolly

I changed the subject to Tail Dolly



To preclude the need to fold/unfold the tail every flight, I built a simple dolly to hold the tail tube and the wings tilted up to clear the tail wires.



Attached are three photos.



Thom in Buffalo

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

root tubes secured_small.jpg

Description:

root tubes secured

Filesize:

89.95 KB

Viewed:

402 Time(s)

Firestar wings tilted on dolly_small.jpg

Description:

Wings tilted

Filesize:

100.01 KB

Viewed:

424 Time(s)

close up of boom-wing dolly_small.jpg

Description:

Close up of dolly

Filesize:

98.5 KB

Viewed:

410 Time(s)

grabo172

Joined: 10 Oct 2006
Posts: 32
Location: Beaver, OH

Posted: Fri Jul 13, 2007 11:57 am Post subject: Re: new/old Kolber

Very Cool!  Now you can be flying in about 10 minutes...



 -Erik

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
-Erik Grabowski
N?????
CFI/CFII/LS-I

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum