 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
moe(at)rosspistons.com
Guest
|
 Posted: Mon Aug 06, 2007 3:45 pm Post subject: Outflow Valve |
 |
|
[img]cid:image002.gif(at)01C7D849.9CA99480[/img] 625 S. Douglas, El Segundo, CA 90245 $B!|(J Phone: (310) 536-0100 Fax: (310) 536-0333
moe(at)rosspistons.com (moe(at)rosspistons.com)
August 6, 2007
Fellow Commander Drivers:
Does anyone have a suggestion as to where one should go to have an outflow valve for the pressurization system rebuilt for a 680F(p)?
Thanks!
Moe
| | - The Matronics Commander-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Commander-List |
|
| Description: |
|
| Filesize: |
7.29 KB |
| Viewed: |
2662 Time(s) |
|
|
|
| Back to top |
|
 |
Jerry Sprayberry
Joined: 10 Jan 2006
Posts: 15
Location: Summerville, GA
|
| Posted: Tue Aug 07, 2007 2:55 am Post subject: Outflow Valve |
|
|
Moe,
Mine were replaced at Commander Aero, you might check with Gary.
Another Subject;
Has anyone had any trouble with IGSO 540 Oil Pressure, I bought a New Rebuilt Engine by Performance Engines and it came with (7) Seven Washers under the Pressure Regulator but still cant get but 53 psi after warm-up. any suggestions will be appreciated.
Jerry
[quote] ---
| | - The Matronics Commander-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Commander-List |
|
| Description: |
|
| Filesize: |
7.29 KB |
| Viewed: |
2669 Time(s) |
|
_________________
Capn Spray |
|
| Back to top |
|
|
moe(at)rosspistons.com
Guest
|
| Posted: Tue Aug 07, 2007 6:23 am Post subject: Outflow Valve |
|
|
Jerry,
Thanks for the tip, I will contact Gary.
Regarding the oil pressure problem. It is generally accepted that the oil pumps on the IGSO 540 series are too small. I can$B!G(Bt remember the GPM (gallons per minute), however, this has been, as I understand it, a long standing problem. Once the pump has in-adequate volume, no amount of spring shimming will raise the oil pressure. Some suggestions: - Have you checked the accuracy of your oil pressure gage? (Laugh, but I have heard some real horror stories)
- Screw an oil pressure gage into the oil galley at the front of the engine and compare the oil pressure on the two gages. Lycoming has a maximum differential that is acceptable, again, I can$B!G(Bt remember what it is, but will look it up for you if necessary.
- Will the oil pressure stay in the green while in flight?
- Will the engine maintain a minimum of 35 PSI at hot idle and about 1,500 RPM (minimum for the fuel pump computer to work)?
Regards,
Moe
N680RR
680F(p)
From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of Jerry Sprayberry
Sent: Tuesday, August 07, 2007 3:54 AM
To: commander-list(at)matronics.com
Subject: Re: Commander-List: Outflow Valve
Moe,
Mine were replaced at Commander Aero, you might check with Gary.
Another Subject;
Has anyone had any trouble with IGSO 540 Oil Pressure, I bought a New Rebuilt Engine by Performance Engines and it came with (7) Seven Washers under the Pressure Regulator but still cant get but 53 psi after warm-up. any suggestions will be appreciated.
Jerry
[quote]
---
| | - The Matronics Commander-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Commander-List |
|
| Description: |
|
| Filesize: |
7.29 KB |
| Viewed: |
2663 Time(s) |
|
|
|
| Back to top |
|
|
BillLeff1(at)aol.com
Guest
|
| Posted: Wed Aug 08, 2007 1:21 pm Post subject: Outflow Valve |
|
|
The test must have worked?
Bill
Get a sneak peek of the all-new AOL.com.
| | - The Matronics Commander-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Commander-List |
|
|
|
| Back to top |
|
|
moe(at)rosspistons.com
Guest
|
| Posted: Wed Aug 08, 2007 2:27 pm Post subject: Outflow Valve |
|
|
Yes, Bill it did. Thank you for your wise council.
Moe
From: owner-commander-list-server(at)matronics.com [mailto:owner-commander-list-server(at)matronics.com] On Behalf Of BillLeff1(at)aol.com
Sent: Wednesday, August 08, 2007 2:21 PM
To: commander-list(at)matronics.com
Subject: Re: Commander-List: Outflow Valve
The test must have worked?
Bill
Get a sneak peek of the all-new AOL.com.
[quote]
href="http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
[b]
| | - The Matronics Commander-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Commander-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
