Matronics Email Lists :: View topic - Dynon D10A HSI for SL-30

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Dynon D10A HSI for SL-30

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

sarg314(at)comcast.net
Guest

Posted: Mon Jul 30, 2007 8:29 pm Post subject: Dynon D10A HSI for SL-30

I finally got around to reading the Dynon web page describing the new 

HSI capability.  I have an SL-30, so it sounds like I'd be foolish not 

to hook it up.  Has any one tried it? Does it work without any gotchas?



Am I correct that I want to connect the RS-232 serial port on pins 3, 4, 

and 5, of the SL-30 to the serial #1 pins (9, 10, 22) on the D10A?  

Apparently the Serial port 2 on the Dynon is used for the blind encoder, 

yes?  I can't find any detailed wiring info on the Dynon web page.  If 

any one has found some, please send me the link.

Thansk,

--

Tom Sargent, RV-6A , electrical system.

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

bicyclop(at)pacbell.net
Guest

Posted: Mon Jul 30, 2007 9:43 pm Post subject: Dynon D10A HSI for SL-30

Go to the forums section of Dynon's site. You can post all kinds of 

questions there and get them answered in pretty short order by Dynon 

employees (and customers too).



Pax,



Ed Holyoke



sarg314 wrote:



 	  Quote: 	
		   



 I finally got around to reading the Dynon web page describing the new 

 HSI capability.  I have an SL-30, so it sounds like I'd be foolish not 

 to hook it up.  Has any one tried it? Does it work without any gotchas?



 Am I correct that I want to connect the RS-232 serial port on pins 3, 

 4, and 5, of the SL-30 to the serial #1 pins (9, 10, 22) on the D10A?  

 Apparently the Serial port 2 on the Dynon is used for the blind 

 encoder, yes?  I can't find any detailed wiring info on the Dynon web 

 page.  If any one has found some, please send me the link.

 Thansk,

 -- 

 Tom Sargent, RV-6A , electrical system.

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

sbuc(at)hiwaay.net
Guest

Posted: Tue Jul 31, 2007 5:54 am Post subject: Dynon D10A HSI for SL-30

sarg314 wrote:

 	  Quote: 	
		   

 

 I finally got around to reading the Dynon web page describing the new 

 HSI capability.  I have an SL-30, so it sounds like I'd be foolish not 

 to hook it up.  Has any one tried it? Does it work without any gotchas?


	


I use the HSI with a GPS feed and it works very nicely. According to 

traffic on the Dynon forum the SL30 version of the HSI is also good.



   I can't find any detailed wiring info on the Dynon web page.  If

 	  Quote: 	
		   any one has found some, please send me the link.


	


Straight from the Dynon web site:



http://dynonavionics.com/docs/support_documentation.html



Sam Buchanan

- The Matronics RV-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum