Matronics Email Lists :: View topic - 701 builders, bottom fuselage

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

701 builders, bottom fuselage

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

ch701builder

Joined: 07 Feb 2006
Posts: 119
Location: N38.9947,W105.1305,ALT. 9,100'

Posted: Thu Aug 02, 2007 5:36 am Post subject: 701 builders, bottom fuselage

All, I am trying to do some pre-drilling holes in the bottom fuselage 

(7F2-3). To start off with, my plans 4th, 6th printing, show that there 

is 303mm between cl to cl of 7F1-3 and 7F1-4, but the 

assembly/construction manual 1.2 04/2003, ( Fuselage Section 1 - page 3 

of 10) states that there should be 285mm between the two. What are some 

of  you scratch builders using, or what is the factory pre-drilled holes 

measuring?



Thanks,



Keith

N 38.9947

W 105.1305

Alt. 9,100'

CH701 -- scratch

*****************************************************************

This e-mail and any files transmitted with it may be proprietary 

and are intended solely for the use of the individual or entity to 

whom they are addressed. If you have received this e-mail in 

error please notify the sender. Please note that any views or

opinions presented in this e-mail are solely those of the author 

and do not necessarily represent those of ITT Corporation. The 

recipient should check this e-mail and any attachments for the 

presence of viruses. ITT accepts no liability for any damage 

caused by any virus transmitted by this e-mail.

*******************************************************************

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

txpilot

Joined: 26 Feb 2007
Posts: 87
Location: Houston, TX

Posted: Thu Aug 09, 2007 6:44 am Post subject: Re: 701 builders, bottom fuselage

Keith,



According to my plans, the 303mm is NOT cl to cl.  It is the dimension from 7F1-4 front to the back of 7F1-3.  In order to hit the centers of the flanges, you need to subtract around 20mm for you pre-drilled hole distance.



Hope this helps.



Dan Ginty

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum