Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

No Title

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

Lanny Fetterman

Joined: 10 Jan 2006
Posts: 37
Location: Catawissa Pa.

Posted: Tue Aug 21, 2007 4:38 pm Post subject: No Title

Dana, The noise you hear in the wing is probably the rivet heads from the 

pop rivets, not a concern. When I fold and unfold my FSII, I use a step 

ladder of the correct height to rest the wing tip on. I hold the wing in 

place with a bungi cord attached to the step ladder and wrapped around the 

counter balance on the aileron and back to the step ladder.  Then I put the 

clevis pin in, that holds the wing in position. Once the pin is in, and the 

wing can`t move aft, I loosen the bungi and attach the strut to the wing, 

then I lift the wing off the ladder with the strut, and attach the strut to 

the fuselage. Lanny Fetterman N598LF

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
Lanny Fetterman Firestar II N598LF

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum