Matronics Email Lists :: View topic - 912 UL Carb Needle index

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

912 UL Carb Needle index

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

experimental208nd(at)comc
Guest

Posted: Sun Sep 30, 2007 3:32 pm Post subject: 912 UL Carb Needle index

Hi List,

  

 I am pulling my Kitfox 4 out of the hanger after a while of  not flying it. I have drained all the  Auto fuel with10% alch in it, and  just filled it back up with non alch auto gas from the airport.

  

 I had moved the Carb needle last year , as I was using the 10%  eth gas and had problems. Now I am going to use the new gas but the needle  settings are making the 912 run rough at the 2k RPM mark, but smooth at the 3k  and higher settings.

  

 Out of the 4 slots on the needle, which one will give me the  best  operations?  it is about 65 deg F  OAT here in  Ma.

 I started with the clip in the second slot from the bottom of  the needle, ( Ran Bad)

 I moved it one notch up and got the same results, moved it to  the bottom one and the low rpms are rough sounding like a Harley sound, middle  rpms are fine.

  

 Any suggestions? i had this nipped in the but last year but  now I am banging my head again

 Thanks

 Jay Fabian

   [quote][b]

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum