Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Dukes pump

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Rocket-List
View previous topic :: View next topic  
Author Message
kshannon(at)seanet.com
Guest
PostPosted: Thu Feb 09, 2006 3:19 pm    Post subject: Dukes pump Reply with quote
Kevin Shannon
Superintendent
Severson Construction, LLC


Question for anybody using a Dukes pump: I am looking at a used Dukes boost
pump on ebay, the auction says 13v 24 psi/47 gph min and 31 psi max which
sounds like the one we need, my question is does it require an additional
check valve manifold type setup and closed loop return like the airflow
performance pump, or do you just simply install it in line and your good to
go? I can't find any specs for it on the Dukes web page.
Thanks
Kevin Shannon

- The Matronics Rocket-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List
Back to top
fred.laforge(at)verizon.n
Guest
PostPosted: Thu Feb 09, 2006 6:06 pm    Post subject: Dukes pump Reply with quote
I ran a Dukes pump on my RV-4,180 hp with fuel injectoin, (Bendix) it
worked fine, no special plumbing or anything.
---

- The Matronics Rocket-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List
Back to top
WiningsJ(at)aol.com
Guest
PostPosted: Thu Feb 09, 2006 7:35 pm    Post subject: Dukes pump Reply with quote
I am using a Dukes pump. It has a pressure relief and check valve built in
(real nice). It had been rebuilt shortly before I bought it. It had a bearing
seal start leaking. I replaced it with a new one and now it is leaking
again. I am going to find something else to use on my Rocket. Jim Winings #34.
317-718-3415

- The Matronics Rocket-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List
Back to top
Jim Anglin



Joined: 10 Jan 2006
Posts: 47
Location: Independence, OR (7S5 Airpark)
PostPosted: Fri Feb 10, 2006 8:36 am    Post subject: Dukes pump Reply with quote
I may be outta line here since you said Dukes, and I am sure you already know about AFP, but I used their setup between the selector and engine for my Rocket and it is beautiful. Has all the check valves, PRV, serviceable filter, hp rotary pump, and everything you need. A little pricey at +- $400, but hey - it's the fuel system - not where I want to cut corners for a few dollars.
Jim Anglin
HR II N144HR
DO NOT ARCHIVE

- The Matronics Rocket-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List

_________________
Jim Anglin
HR II N144HR
Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
brinker(at)cox-internet.c
Guest
PostPosted: Fri Feb 10, 2006 9:54 am    Post subject: Dukes pump Reply with quote
When you refer to AFP you are refering to Airflow Perfomance ?

Randy

---

- The Matronics Rocket-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List
Back to top
Jim Anglin



Joined: 10 Jan 2006
Posts: 47
Location: Independence, OR (7S5 Airpark)
PostPosted: Sat Feb 11, 2006 2:54 pm    Post subject: Dukes pump Reply with quote
Time: 09:54:51 AM PST US
From: "Brinker" <brinker(at)cox-internet.com>
Subject: Re: Dukes pump



--> When you refer to AFP you are refering to -->-->-->Airflow
Perfomance ?

Randy
Yes - AFP is Airfow Performance
Jim Anglin
HR II N144HR
DO NOT ARCHIVE

- The Matronics Rocket-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Rocket-List

_________________
Jim Anglin
HR II N144HR
Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Rocket-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group