Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

M-14 idle mixture

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
Mozam



Joined: 24 Nov 2006
Posts: 85

PostPosted: Sun Sep 30, 2007 9:14 am    Post subject: M-14 idle mixture Reply with quote

Many of us have noticed that M-14's from Romania have idle mixtures that are too rich. They puff black smoke (and even flames at night) when idling. I do not know why the factory does this, but it seems fairly common. The good news is that it isn't difficult to fix.

I finally got around to adjusting mine and am VERY happy with the result. It is a little bit of a pain as you need to pull the bottom exhaust section off on the right side to get at it (unless you have hands and fingers like a spider), but is a very simple adjustment screw once you can get at it.

If you do adjust this mixture, remember this mixture screw is an air bleed (not fuel) adjustment. So, to lean the mixture open the valve (counter-clockwise). It took eight clicks of leaning to get mine where it seems good.

It idles better now and has a lot less stumble if you goose the throttle from idle to a higher setting.

Cheers,
Steve


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message Send e-mail
fougapilot



Joined: 20 Jul 2007
Posts: 88
Location: Flat on my back with minimum airspeed

PostPosted: Sun Sep 30, 2007 2:53 pm    Post subject: Re: M-14 idle mixture Reply with quote

Mozam,

Thanks for the tips. Need to do the same on mine soon. Would you, by any chance, have a photo showing exactly which screw we need to clear access to>

thanks,

D


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group