Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rotax 912 and 100LL

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

jindoguy(at)gmail.com
Guest

Posted: Mon Oct 22, 2007 6:48 am Post subject: Rotax 912 and 100LL

According to Eric Tucker and Rotax, there are two primary problems with using 100LL in the 912 and both can be dealt with.



1) If the engine is not primarily run on 100LL (up to 30% of time during oil change cycle) change oil and filter at 50 hours. Refer to Line maintenance manual 05-20-00  2.2.7) a) and b) note 1.

Greater than 30% of time during oil change cycle, change the oil and filter at 25 hours regardless of oil type. SI-912-016 3.3) page 4 

In addition, when using 100LL, semi synthetic oil is recommended. Refer to SI-912-016, page 4. 

2) If you run 100LL more than 30% an inspection of the overload clutches at 600 hours. Line maintenance manual 05-20-00, 2.2.5) b), page 8,  and 05-50-00, 2.2), page 3. and SB-912-033.



  [quote][b]

- The Matronics Kolb-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum