nuckolls.bob(at)cox.net Guest
|
Posted: Fri Oct 19, 2007 7:12 am Post subject: Strobe cable - another question/same topic |
|
|
At 08:44 AM 10/19/2007 -0600, you wrote:
Quote: |
On Fri, 19 Oct 2007 10:01:38 -0400
Neil Clayton <harvey4(at)earthlink.net> wrote:
>
<harvey4(at)earthlink.net>
>
> I just installed my strobe cables yesterday (I now have two working
> strobes - yea!!!)
> Inside the wire bundle were the three conductors wrapped in a foil
> sleeve, but there's a forth bare conductor, which I presume is a ground.
> What do I do with that? Where to connect it? Snip it off?
>
> Thanks
> Neil
>
>
Hi Neil,
That wire is the connection for the foil shield. Connect it wherever
the shield is supposed to be connected.
Bob W.
|
Neil, here's an excerpt from the wire catalog
on this technology.
http://www.aeroelectric.com/Mfgr_Data/Wire/Belden/Beldfoil_Shielding.jpg
Bob . . .
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|