![Matronics Email Lists Forum Index](templates/Matronics/images/logo_phpBB.gif) |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
matt(at)n559rv.com Guest
|
Posted: Mon Feb 20, 2006 6:49 pm Post subject: Help on Holes in Fuse for Brake Lines... |
|
|
I was drilling the holes for the landing gear and the brake lines as per the template on DWG 34A for the RV-7A. It says to enlarge the pilot
hole for the brake line as per DWG 28. DWG 28 says to drill it to 5/8" for the brake line. The problem is that 5/8" seems waay to big for the
hardware called out on DWG 36A (AN837-4D 45 deg. Elbow). I already drilled the hole to 5/8" per the plans and there is a lot of wiggle
room. Are the plans wrong on this or am I missing something???
P.S. I noticed that on another fitting (the fuel vent) it calls out 7/16" hole in the fuse skin which seems correct...
- Matt
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
sfarner(at)gmail.com Guest
|
Posted: Mon Feb 20, 2006 7:39 pm Post subject: Help on Holes in Fuse for Brake Lines... |
|
|
Matt,
I believe that the elbow is not attached to the skin, but rather the landing
gear mount, where the elbow fitting is inserted up the hole on the mount
with the nut on top.
The fuel vent fitting you mentioned is directly attached to the skin.
Scott
www.scottfarner.com
RV-7A Finish
On 2/20/06, Matt Johnson <matt(at)n559rv.com> wrote:
Quote: |
I was drilling the holes for the landing gear and the brake lines as per
the template on DWG 34A for the RV-7A. It says to enlarge the pilot
hole for the brake line as per DWG 28. DWG 28 says to drill it to 5/8" for
the brake line. The problem is that 5/8" seems waay to big for the
hardware called out on DWG 36A (AN837-4D 45 deg. Elbow). I already drilled
the hole to 5/8" per the plans and there is a lot of wiggle
room. Are the plans wrong on this or am I missing something???
P.S. I noticed that on another fitting (the fuel vent) it calls out 7/16"
hole in the fuse skin which seems correct...
- Matt
|
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
matt(at)n559rv.com Guest
|
Posted: Mon Feb 20, 2006 8:59 pm Post subject: Help on Holes in Fuse for Brake Lines... |
|
|
Thanks Scott. I would have never guessed that on my own and I looked at the plans many times. Thank God for these forums.
- Matt
--
| - The Matronics RV-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV-List |
|
|
|
Back to top |
|
![](templates/Matronics/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|