Matronics Email Lists :: View topic - Locations for Head Set Jacks?

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Locations for Head Set Jacks?

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

goodings(at)yorku.ca
Guest

Posted: Thu Nov 08, 2007 7:27 am Post subject: Locations for Head Set Jacks?

We used two 4"x2"x1" die-cast Al boxes with the large flat side rivetted

to the fuselage outer skin, mounted just under and behind the panel's

outer edges.  The two jacks in each box are in the vertical 4"x1" edge.

This way, we can unscrew the box lid to expose the wiring connections to

the intercom; there is quite a lot of wiring.  This keeps the plug cords

from the head sets down the side of the fuselage out of the way, on both

sides.  One can easily get at the plugs while flying.  If we were doing it

again, we would certainly do it the same way.



John and Peter Goodings, C-FGPJ, CH601HD with R912S, Ottawa/Carp/Toronto.

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum