Matronics Email Lists :: View topic - Flap Actuator Moutning Points

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Flap Actuator Moutning Points

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

4RCSIMMONS(at)comcast.net
Guest

Posted: Wed Dec 12, 2007 4:36 am Post subject: Flap Actuator Moutning Points

Hey List!



I was going to place the flap actuator last night and function it (Temp assembly) and the holes to receive the A12 bolts are not quite big enough in the actuator assy. One end is a plastic end in the housing and the other is the actuator end that receives the steel sleeve/push rod.



Any body else have this problem? I have drill bits but would like to ask if others have had the same issue and what was the counter measure.



Also, it is suggested to paint all the steel parts, (Torgue tubes etc...) but the way the sheet metal bearings work  

how loose are builders making the holse as to not scratch paint when installing the bearings on the tubes?



Do not archive



--

Thanks,

Rich Simmons

601 XL Flap actuator area

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

DaveG601XL

Joined: 27 Oct 2006
Posts: 351
Location: Cincinnati, Oh

Posted: Wed Dec 12, 2007 8:43 am Post subject: Re: Flap Actuator Moutning Points

Rich,



I remembered having to drill out the actuator hole also.  Did not seem like a big deal and there was plenty of material left on the actuator.



I do not recall having any problem getting the sheet metal shims on the flap tube.



Good luck,

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
David Gallagher
Cincinnati, OH area

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum