 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
ashontz
Joined: 27 Dec 2006
Posts: 723
|
 Posted: Sat Dec 22, 2007 10:39 am Post subject: Hinged Ailerons plans |
 |
|
Where do I find the design changes for the hinged ailerons. I just went out in the garage to finally start building again and traced out some form templates and looked at the plans and realized the hingeless ailerons dimensions are going to work with the hinge.
Thanks
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
 |
carlossa52(at)gmail.com
Guest
|
| Posted: Sat Dec 22, 2007 1:08 pm Post subject: Hinged Ailerons plans |
|
|
My plans (-HD) show the mod on the same page as the hingeless ailerons...
Carlos
On 22/12/2007, ashontz <ashontz(at)nbme.org (ashontz(at)nbme.org)> wrote:[quote]--> Zenith-List message posted by: "ashontz" < ashontz(at)nbme.org (ashontz(at)nbme.org)>
Where do I find the design changes for the hinged ailerons. I just went out in the garage to finally start building again and traced out some form templates and looked at the plans and realized the hingeless ailerons dimensions are going to work with the hinge.
[b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
ashontz
Joined: 27 Dec 2006
Posts: 723
|
| Posted: Sat Dec 22, 2007 2:08 pm Post subject: Re: Hinged Ailerons plans |
|
|
Mine don't. Do you have to pay for plans updates? If that's so that a bunch of crap. I haven't gotten any updates yet.
[quote="carlossa52(at)gmail.com"]My plans (-HD) show the mod on the same page as the hingeless ailerons...
Carlos
On 22/12/2007, ashontz <ashontz> wrote: | Quote: | --> Zenith-List message posted by: "ashontz" <ashontz>
Where do I find the design changes for the hinged ailerons. I just went out in the garage to finally start building again and traced out some form templates and looked at the plans and realized the hingeless ailerons dimensions are going to work with the hinge.
[b] |
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
Afterfxllc(at)aol.com
Guest
|
| Posted: Sat Dec 22, 2007 3:09 pm Post subject: Hinged Ailerons plans |
|
|
The only difference is they bend the rear angle the other direction and add the hinge.
In a message dated 12/22/2007 5:10:31 P.M. Eastern Standard Time, ashontz(at)nbme.org writes:
| Quote: | --> Zenith-List message posted by: "ashontz" <ashontz(at)nbme.org>
Mine don't. Do you have to pay for plans updates? If that's so that a bunch of crap. I haven't gotten any updates yet.
[quote="carlossa52(at)gmail.com"]My plans (-HD) show the mod on the same page as the hingeless ailerons...
Carlos
On 22/12/2007, ashontz wrote:
| Quote: | --> Zenith-List message posted by: "ashontz"
Where do I find the design changes for the hinged ailerons. I just went out in the garage to finally start building again and traced out some form templates and looked at the plans and realized the hingeless ailerons dimensions are going to work with the hinge.
[b]
|
--------
Andy Shontz
CH601XL - Corvair
www.mykitlog.com/ashontz
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=153709#153709
|
See AOL's top rated recipes and easy ways to stay in shape for winter.
[quote][b]
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
barcusc(at)comcast.net
Guest
|
| Posted: Sat Dec 22, 2007 3:23 pm Post subject: Hinged Ailerons plans |
|
|
My kit came with the hingeless ailerons and I decided to change it. I cut
20mm off the 40mm hingeless flange, added .025 L with the hinge sandwiched
between the .025 L and the flange on top. I discussed this with Chris Heinz
before making the change and he said it is good, no problem at all. If you
look at the hingless versus the hinge type you will notice the bend in the
bottom flange is opposite, that is why I added the .025 L below the top
flange. It took less than an hour to change it over.
Clyde Barcus
601 XL, Continental Powered
Wings, Tail & Engine Complete
Working on Fuselage
---
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
