Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Mod 73

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

CraigEllison

Joined: 09 Jan 2006
Posts: 24
Location: Silverton, OR USA

Posted: Thu Dec 27, 2007 6:42 pm Post subject: Mod 73

All,

  

 I just finished Mod 73 Undercarriage frame  strengthing, wasn't much fun and glad it's behind me.  I now have a 16.5 mm  hand reamer that I don't have much use for.  If there is anyone out there  that hasn't accomplished this Mod yet and needs one let me know and I'll send it  on.

  

 craig ellison

 craig.ellison2(at)verizon.net

 silverton, OR

 N205CN

    [quote][b]

96victor(at)gmail.com
Guest

Posted: Thu Dec 27, 2007 7:46 pm Post subject: Mod 73

Hi Craig



As you know I am not yet flying and I have been awaiting a reamer...  I am sad that you have the bird for sale but since you did the mod maybe you have changed your mind?   I am thinking of a flight in the Spring because we now have a foot or more of snow and it is supposed to snow for the next 24 hours...  (I still believe in global warming.)  The snow gives me a little more reason for procrastination... 



Off topic.  Our local EAA group is building a Breezy in my shop.  It is going to be fun.



I have been wondering if you would be interested in making a first flight in my bird as I am pretty rusty and evidently you have a grass strip that sounds like it would be better for me.  No big deal to trailer it down there. 



I will gladly pay for shipping and will send it on after.



If no one else claims it.



I am in deep snow at:



Tom Friedland, 70 Majestic Heights Dr. Ellensburg, WA 98926 509 480 0267



 On Dec 27, 2007 6:41 PM, Craig Ellison <craig.ellison2(at)verizon.net (craig.ellison2(at)verizon.net)> wrote:

[quote]        All,

  

 I just finished Mod 73 Undercarriage frame  strengthing, wasn't much fun and glad it's behind me.  I now have a 16.5 mm  hand reamer that I don't have much use for.  If there is anyone out there  that hasn't accomplished this Mod yet and needs one let me know and I'll send it  on.

  

 craig ellison

 craig.ellison2(at)verizon.net (craig.ellison2(at)verizon.net)

 silverton, OR

 N205CN

     	  Quote: 	
		  

	


[b]

jeff(at)rmmm.net
Guest

Posted: Thu Dec 27, 2007 8:17 pm Post subject: Mod 73

Craig,

I will be needing this soon I hope. We have been trying to get my 

shop/hanger ready to some Europa to Gold Rush and I'm almost there. Mod 

73 is one on my list. If no one else needs it right away put me on your 

list. E-mail me at jeff(at)rmmm.net when you have a chance.

Thanks,



Jeff R.

A258 - N128LJ / Gold Rush 100 hours and climbing slowly.

On Dec 27, 2007, at 8:41 PM, Craig Ellison wrote:



 	  Quote: 	
		   All,

  

 I just finished Mod 73 Undercarriage frame strengthing, wasn't much 

 fun and glad it's behind me.  I now have a 16.5 mm hand reamer that I 

 don't have much use for.  If there is anyone out there that hasn't 

 accomplished this Mod yet and needs one let me know and I'll send it 

 on.

  

 craig ellison

 craig.ellison2(at)verizon.net

 silverton, OR

 N205CN

fklein(at)orcasonline.com
Guest

Posted: Thu Dec 27, 2007 9:39 pm Post subject: Mod 73

Tom,



Please let me know when you are finished w/ Craig's 16.5 mm reamer; I'd 

love to use it when it's available. I don't have the Mod 73 parts at 

this time, but will order them tomorrow.



My address is: Fred Klein, POB 1089, Eastsound, WA 98245



Thanks,



Fred



On Thursday, Dec 27, 2007, at 19:45 US/Pacific, Tom Friedland wrote:



 	  Quote: 	
		   Hi Craig



 As you know I am not yet flying and I have been awaiting a reamer...  


	


-- 

This message has been scanned for viruses and

dangerous content by MailScanner, and is

believed to be clean.

CraigEllison

Joined: 09 Jan 2006
Posts: 24
Location: Silverton, OR USA

Posted: Thu Dec 27, 2007 10:29 pm Post subject: Mod 73

Hi Ken,Tom,Jeff and Fred,

  

 By the sound of things Tom might be needing it  first then Ken ,Jeff and Fred.  Your all welcome.  I'll plan on  sending it to to Tom first and if you could send it on to the next.  I also  have the ACF 50 your welcome to have  but I don't know if I can send by  post.  Let me know if you could use it.

  

 craig

 [quote]   ---

CraigEllison

Joined: 09 Jan 2006
Posts: 24
Location: Silverton, OR USA

Posted: Thu Dec 27, 2007 10:31 pm Post subject: Mod 73

Hi Tom, 

  

 My last post was ment to go to all, sorry for the  mix-up.

  

 craig

 [quote]   ---

CraigEllison

Joined: 09 Jan 2006
Posts: 24
Location: Silverton, OR USA

Posted: Thu Dec 27, 2007 10:36 pm Post subject: Mod 73

Hi Ken,Jeff, and Fred,



Looks like Tom could use the reamer first so I'll send it along to him. 

When he's finished with it he can pass it on to Ken,Jeff and Fred.  Looks 

like Kevin has one also so you might not need mine.



Good luck gentlemen,



craig

---

mau11(at)free.fr
Guest

Posted: Fri Dec 28, 2007 2:28 am Post subject: Mod 73

hi all,

There is a best alternative of reamer solution: Dremel cylinder abrasive

dia.15.5mm. Used gently into the tube, it is perfect and not agressive as

like reamer.

Michel Auvray

Builder 145



-----Message d'origine-----

De : owner-europa-list-server(at)matronics.com

[mailto:owner-europa-list-server(at)matronics.com]De la part de Craig

Ellison

Envoyé : vendredi 28 décembre 2007 07:36

À : europa-list(at)matronics.com

Objet : Re: Mod 73


<craig.ellison2(at)verizon.net>



Hi Ken,Jeff, and Fred,



Looks like Tom could use the reamer first so I'll send it along to him.

When he's finished with it he can pass it on to Ken,Jeff and Fred.  Looks

like Kevin has one also so you might not need mine.



Good luck gentlemen,



craig

---

rlborger(at)mac.com
Guest

Posted: Fri Dec 28, 2007 5:18 am Post subject: Mod 73

Gents,

My reamer is on its way to Rich Schultz, The Woodlands, TX.  You can post a note to him and have him send it on to any of you next.



Good building and great flying,

Bob Borger

Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S

http://www.europaowners.org/N914XL

(90%) tail kit done, wings closed, cockpit module installed, pitch system in, landing gear frame in, rudder system in, outrigger mod in, Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar in, flap drive in, Mod 70 done.  Baggage bay in.  Flaps & Main Gear complete.  Mod 72 complete.  Instrument panel complete, except for testing.  Rotax 914 installed (for the 3rd time).  Airmaster Prop installed.  Electrical complete, except for testing.  Fuel system complete except for testing.  Working in - 32 Tail, 34 Door Latches & 35 Doors, 37 Interior & Finishing.  Airmaster arrived 29 Sep 05.  Seat arrived from Oregon Aero.  E04 interior kit has arrived and is being installed. 

3705 Lynchburg Dr.

Corinth, TX  76208

Home:  940-497-2123

Cel:  817-992-1117

On Dec 28, 2007, at 12:26 AM, Craig Ellison wrote:

[quote]Hi Ken,Tom,Jeff and Fred,

 

By the sound of things Tom might be needing it first then Ken ,Jeff and Fred.  Your all welcome.  I'll plan on sending it to to Tom first and if you could send it on to the next.  I also have the ACF 50 your welcome to have  but I don't know if I can send by post.  Let me know if you could use it.

 

craig

[quote]---

Troy Maynor

Joined: 10 Jan 2006
Posts: 162

Posted: Fri Dec 28, 2007 6:48 am Post subject: Mod 73

Hi All,

I too will need the reamer when it is available. No rush. Don't need the

ACF50 necessarily. I assume regular mill cutting oil will suffice.

Let me know of the cost involved and where to send it. My mailing address

is: 

Troy Maynor

PO Box 1802

Weaverville, NC 28787



Troy Maynor

N120EU Europa Monowheel Classic

Left to finish:

Paint,(some) interior,engine install, (some) wiring.

Weaverville, NC USA

winmail.dat

Description:

Download

Filename:

winmail.dat

Filesize:

1.74 KB

Downloaded:

312 Time(s)

Brian Davies

Joined: 10 Jan 2006
Posts: 124
Location: uk

Posted: Fri Dec 28, 2007 8:18 am Post subject: Mod 73

Hi Troy,   

The ACF50 is for anti corrosion, not for the reamimg.   

Regards   

Brian Davies   

_____________________________________________   

From:   owner-europa-list-server(at)matronics.com [HYPERLINK mailto:owner-europa-list-server(at)matronics.com mailto:owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)]  On Behalf Of Troy Maynor  

Sent:   28 December 2007 14:38  

To:     europa-list(at)matronics.com  

Subject:        Re: Mod 73   

Hi All,  

I too will need the reamer when it is available. No rush. Don't need the ACF50 necessarily. I assume regular mill cutting oil will suffice.  

Let me know of the cost involved and where to send it. My mailing address is:   

Troy Maynor  

PO Box 1802  

Weaverville, NC 28787   

Troy Maynor  

N120EU Europa Monowheel Classic  

Left to finish:  

Paint,(some) interior,engine install, (some) wiring.  

Weaverville, NC USA  

  

No virus found in this outgoing message.

 27/12/2007 13:34

   

  

No virus found in this outgoing message.

 27/12/2007 13:34

        [quote][b]

wdaniell(at)etb.net.co
Guest

Posted: Sat Dec 29, 2007 12:08 pm Post subject: Mod 73

Can anyone tell what etching primer is and what it does please  

Will  

       

From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of Brian Davies

 Sent: Friday, December 28, 2007 11:17

 To: europa-list(at)matronics.com

 Subject: RE: Mod 73  

  

  

   

Hi Troy,   

The ACF50 is for anti corrosion, not for the reamimg.   

Regards   

Brian Davies   

_____________________________________________ 

 From:   owner-europa-list-server(at)matronics.com [HYPERLINK mailto:owner-europa-list-server(at)matronics.com mailto:owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com)]  On Behalf Of Troy Maynor  

Sent:   28 December 2007 14:38 

 To:     europa-list(at)matronics.com 

 Subject:        Re: Mod 73   

Hi All, 

 I too will need the reamer when it is available. No rush. Don't need the ACF50 necessarily. I assume regular mill cutting oil will suffice.  

Let me know of the cost involved and where to send it. My mailing address is: 

 Troy Maynor 

 PO Box 1802 

 Weaverville, NC 28787   

Troy Maynor 

 N120EU Europa Monowheel Classic 

 Left to finish: 

 Paint,(some) interior,engine install, (some) wiring. 

 Weaverville, NC USA   

   

No virus found in this outgoing message.

 27/12/2007 13:34

   

 

 No virus found in this outgoing message.

 27/12/2007 13:34

      	  Quote: 	
		    http://www.matronics.com/contribution 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		  	
0 	  Quote: 	
		  	
1 	  Quote: 	
		  	
2 	  Quote: 	
		  	
3 	  Quote: 	
		  	
4  

   

No virus found in this incoming message.

 26-Dec-07 17:26  

     

  26-Dec-07 17:26

    [quote][b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum