Allen Fulmer
Joined: 10 Jan 2006
Posts: 79
Location: Alexander City, AL
|
 Posted: Mon Jan 28, 2008 5:41 pm Post subject: Thumb screws for plastic hoods |
 |
|
Having worked on PCs for the last 25 years I have learned to hate the little
screws that are used to fasten db connectors to the back of computers.
Fortunately, most cable manufacturers have gone to using thumb screws so a
screw driver is not required. Until GRT, Trutrak, and others!!
After two false starts I have finally found a supplier and the thumb screw
that will fit most all the plastic db hoods provided by GRT, Trutrak, and
others.
You may not care BUT IF YOU DO here is the link to the part. 50 of them
will cost you 12.50 plus frt. ($6.10) and tax ($1.07).
Allied Electronics, Inc. Stock No. is 810-0009. Link to page follows:
https://www.alliedelec.com/Search/ProductDetail.asp?SKU=810-0009&SEARCH=&MPN
=B71E014276&DESC=B71E014276&R=810%2D0009&sid=479D1B001E0BE17F
Allen Fulmer
RV7 Wiring/Plumbing
Eggenfellner Subaru E6T on firewall
N808AF reserved
Alexander City, AL
256-329-2001
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
RV7 QB Fuselage
Eggenfellner H6 on orde
N808AF reserved
Alexander City, AL |
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
