Matronics Email Lists :: View topic - Rudder Pedal Mod

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rudder Pedal Mod - UPDATE

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

bhancock(at)worldwidewarb
Guest

Posted: Wed Feb 06, 2008 9:44 am Post subject: Rudder Pedal Mod - UPDATE

Gang,



Apparently there's a lot of you with long legs!  Here are answers to 

the questions I'm getting.



1)  Price is $250/set.  One set does one rudder pedal assembly.

2)  Installation is dead nuts simple.  Take out the arm (2 bolts per 

side), remove pedal and install on new arm, and reinstall.

3)  Designed to withstand 300 lbs. of pressure...stronger and lighter 

than the original.

4)  First run will happen next week, hopefully.  We should be shipping 

inside of two weeks.

5)  Payment options are currently check or COD.  We will soon be 

accepting CC's...

6)  Design will work in front and back of the CJ and Yak-52.  Also fits 

the -50.



Contact me offline for pics of the prototype.  Thanks for the support!

Barry Hancock

Worldwide Warbirds, Inc.

office (909) 606-4444

cell    (949) 300-5510

www.worldwidewarbirds.com

www.cj6.com



Express Mailing address:

7000 Merrill Ave, B-110, Unit J

Chino, CA 91710



Regular Mailing address:

7000 Merrill Ave., Box 91

Chino, CA 91710



The information contained in this e-mail message is intended only for 

the personal and confidential use of the designated recipients. If the 

reader of this message is not an intended recipient, you are hereby 

notified that any review, use, dissemination, forwarding or copying of 

this message is strictly prohibited. Please notify us immediately by 

reply e-mail or telephone, and delete the original message and all 

attachments from your system.  Thank you

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

ByronMFox(at)aol.com
Guest

Posted: Wed Feb 06, 2008 10:13 am Post subject: Rudder Pedal Mod - UPDATE

In a message dated 2/6/08 9:45:34 AM, bhancock(at)worldwidewarbirds.com writes:

 

 

  	  Quote: 	
		  2)  Installation is dead nuts simple.  Take out the arm (2 bolts per

 side), remove pedal and install on new arm, and reinstall.

 	


 

 Great. There's hope for me! Looking forward to it.   When do you want my check? ...Blitz

**************

Biggest Grammy Award surprises of all time on AOL Music.

     (http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp00300000002548)  [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

bu131(at)swbell.net
Guest

Posted: Wed Feb 06, 2008 10:23 am Post subject: Rudder Pedal Mod - UPDATE

how about the 55?

  andres



Barry Hancock <bhancock(at)worldwidewarbirds.com> wrote:

  [quote]Gang,



Apparently there's a lot of you with long legs! Here are answers to 

the questions I'm getting.



1) Price is $250/set. One set does one rudder pedal assembly.

2) Installation is dead nuts simple. Take out the arm (2 bolts per 

side), remove pedal and install on new arm, and reinstall.

3) Designed to withstand 300 lbs. of pressure...stronger and lighter 

than the original.

4) First run will happen next week, hopefully. We should be shipping 

inside of two weeks.

5) Payment options are currently check or COD. We will soon be 

accepting CC's...

6) Design will work in front and back of the CJ and Yak-52. Also fits 

the -50.



Contact me offline for pics of the prototype. Thanks for the  support!

Barry Hancock

Worldwide Warbirds, Inc.

office (909) 606-4444

cell    (949) 300-5510

www.worldwidewarbirds.com

www.cj6.com



Express Mailing address:

7000 Merrill Ave, B-110, Unit J

Chino, CA 91710



Regular Mailing address:

7000 Merrill Ave., Box 91

Chino, CA 91710



The information contained in this e-mail message is intended only for 

the personal and confidential use of the designated recipients. If the 

reader of this message is not an intended recipient, you are hereby 

notified that any review, use, dissemination, forwarding or copying of 

this message is strictly prohibited. Please notify us immediately by 

reply e-mail or telephone, and delete the original message and all 

attachments from your system.  Thank you

[b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

pa3arw(at)euronet.nl
Guest

Posted: Wed Feb 06, 2008 1:29 pm Post subject: Rudder Pedal Mod - UPDATE

Barry,  

   

Do you ship to Holland as well??

 

 Hans  

         

  

Van: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] Namens Barry Hancock

 Verzonden: woensdag 6 februari 2008 18:38

 Aan: yak-list(at)matronics.com

 Onderwerp: Rudder Pedal Mod - UPDATE  

  

   

Gang,

 

 Apparently there's a lot of you with long legs! Here are answers to the questions I'm getting.

 

 1) Price is $250/set. One set does one rudder pedal assembly. 

 2) Installation is dead nuts simple. Take out the arm (2 bolts per side), remove pedal and install on new arm, and reinstall. 

 3) Designed to withstand 300  lbs. of pressure...stronger and lighter than the original.

 4) First run will happen next week, hopefully. We should be shipping inside of two weeks.

 5) Payment options are currently check or COD. We will soon be accepting CC's...

 6) Design will work in front and back of the CJ and Yak-52. Also fits the -50.

 

 Contact me offline for pics of the prototype. Thanks for the support!

 

 

 Barry Hancock<?color><?param 0404,0000,7F7F> 

 <?/color>Worldwide Warbirds, Inc.

 office (909) 606-4444

 cell    (949) 300-5510

 www.worldwidewarbirds.com

 www.cj6.com

 

 Express Mailing address:

 7000 Merrill Ave, B-110, Unit J

 Chino, CA 91710

 

 Regular Mailing address:

 7000 Merrill Ave., Box 91

 Chino, CA 91710

 

 <?color><?param 0404,0000,7F7F>The information contained in this e-mail message is intended only for the personal and confidential use of the designated recipients. If the reader of this message is not an intended recipient, you are hereby notified that any review, use, dissemination, forwarding or copying of this message is strictly prohibited. Please notify us immediately by reply e-mail or telephone, and delete the original message and all attachments from your system.  Thank you<?/color>

 

 

 

   <?pre><?b><?font size=2 color=000000" face="courier href="http://www.matronics.com/navigator?yak-list">http://www.matronics.com/Navigator?Yak-List<?/a> href="http://forums.matronics.com">http://forums.matronics.com<?/a> href="http://www.matronics.com/contribution">http://www.matronics.com/contribution<?/a> ===========

<?/b><?/font><?/pre><?/body><?/html>

        [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

bhancock(at)worldwidewarb
Guest

Posted: Thu Feb 07, 2008 7:05 am Post subject: Rudder Pedal Mod - UPDATE

On Feb 6, 2008, at 11:58 PM, Yak-List Digest Server wrote:

 	  Quote: 	
		  

Subject: RE: Rudder Pedal Mod - UPDATE 



 

Barry, 



 



 

Do you ship to Holland as well?? 	




Hans, 



We'll ship anywhere...



Cheers,



Barry



 

Barry Hancock

Worldwide Warbirds, Inc.

office (909) 606-4444

cell (949) 300-5510

www.worldwidewarbirds.com





This email message and any attachment(s) are for the sole use of the intended recipient(s) and may contain proprietary and/or confidential company information which may be privileged or otherwise protected from disclosure.  Any unauthorized review, use, disclosure or distribution is prohibited. If you believe you are not the intended recipient(s), please contact us at info(at)worldwidewarbirds.com (info(at)worldwidewarbirds.com) by reply email and destroy the original message and any copies of the message as well as any attachment(s) to the original. 



 [quote][b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

HawkerPilot2015

Joined: 10 Jan 2006
Posts: 503

Posted: Thu Feb 07, 2008 7:04 pm Post subject: Re: Rudder Pedal Mod - UPDATE

Barry,



Sign me up for a set.



Tim

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

viperdoc(at)mindspring.co
Guest

Posted: Thu Feb 07, 2008 7:43 pm Post subject: Rudder Pedal Mod - UPDATE

You guys are going to lose some of your G tolerance by stretching your legs

out.

Doc



--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

brian-1927(at)lloyd.com
Guest

Posted: Thu Feb 07, 2008 8:07 pm Post subject: Rudder Pedal Mod - UPDATE

On Feb 7, 2008, at 7:40 PM, Roger Kemp M.D. wrote:



 	  Quote: 	
		   

 >



 You guys are going to lose some of your G tolerance by stretching  

 your legs

 out.


	


How much do you think? 5G already hurts. 



--

Brian Lloyd                         3191 Western Drive

brian HYPHEN 1927 AT lloyd DOT com    Cameron Park, CA 95682

+1.916.367.2131 (voice)             +1.270.912.0788 (fax)



I fly because it releases my mind from the tyranny of petty things . . .

— Antoine de Saint-Exupéry



PGP key ID:          12095C52A32A1B6C

PGP key fingerprint: 3B1D BA11 4913 3254 B6E0  CC09 1209 5C52 A32A 1B6C

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

MarkWDavis

Joined: 03 Jan 2007
Posts: 104
Location: Syracuse, KS

Posted: Thu Feb 07, 2008 8:35 pm Post subject: Rudder Pedal Mod - UPDATE

As I understand it , you will still have the option to move the pedals back 

to a more rearward position with the adjuster, but have a little more room 

for cross countries when wanted.



Mark Davis

N44YK



---

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum