Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Yak-List Digest: 12 Msgs - 02/28/08

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
blakel



Joined: 24 Oct 2007
Posts: 5

PostPosted: Sun Mar 02, 2008 10:02 am    Post subject: Yak-List Digest: 12 Msgs - 02/28/08 Reply with quote

Yak-List Digest Server wrote:
Quote:
*

==================================================
Online Versions of Today's List Digest Archive
==================================================

Today's complete Yak-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Yak-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.

HTML Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 08-02-28&Archive=Yak

Text Version:

http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 08-02-28&Archive=Yak
================================================
EMail Version of Today's List Digest Archive
================================================


----------------------------------------------------------
Yak-List Digest Archive
---
Total Messages Posted Thu 02/28/08: 12
----------------------------------------------------------


Today's Message Index:
----------------------

1. 03:36 AM - Re: Rudder Pedal mod (fougapilot)
2. 05:59 AM - Re: Rudder Pedal mod (skidmk)
3. 09:51 AM - Re: Rudder Pedal mod (fougapilot)
4. 11:07 AM - ExhaustValve adjustment (skidmk)
5. 12:54 PM - Prop Paint and Decals. (CJcanuck)
6. 12:55 PM - WTB Parachute/GPS (GreasySideUp)
7. 01:30 PM - Re: Prop Paint and Decals. (doug sapp)
8. 01:33 PM - Re: WTB Parachute/GPS (CJcanuck)
9. 02:53 PM - Re: ExhaustValve adjustment (Craig Payne)
10. 03:03 PM - Re: WTB Parachute/GPS (Roger Kemp M.D.)
11. 03:55 PM - Re: Re: WTB Parachute/GPS (Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E)
12. 05:07 PM - Re: WTB Parachute/GPS (A. Dennis Savarese)



________________________________ Message 1 _____________________________________
Time: 03:36:16 AM PST US
Subject: Re: Rudder Pedal mod
From: "fougapilot" <fougapilot(at)hotmail.com>
Barry,

Being in the 6'+ club, I am interested by your Net 4".

Do you have pictures of an installed set? I have looked at your website but couldn't
find any.

Thanks,

Dan
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=166698#166698
________________________________ Message 2 _____________________________________
Time: 05:59:19 AM PST US
Subject: Re: Rudder Pedal mod
From: "skidmk" <bourgem(at)cia.com>
Hi Dan,,

sent you the Barry's info pac last night.

--------
Mike &quot;Skidmk&quot; Bourget
Ottawa, Ontario
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=166721#166721
________________________________ Message 3 _____________________________________
Time: 09:51:24 AM PST US
Subject: Re: Rudder Pedal mod
From: "fougapilot" <fougapilot(at)hotmail.com>
Which did not include any pictures...

Hence my request with Barry.

D
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=166759#166759
________________________________ Message 4 _____________________________________
Time: 11:07:16 AM PST US
Subject: ExhaustValve adjustment
From: "skidmk" <bourgem(at)cia.com>
HI, searched the archives and didn't come up with much. Taking delivery of my
CJ sometime in march. The exhaust valves have not been adjusted in the last 3
annuals (these are the ones I've seen so far).. 2 cyl's are in the low 70's high
60's.

I've never done valve adjustment, where would I get the tools and the "manual"?

thanks

Mike

--------
Mike &quot;Skidmk&quot; Bourget
Ottawa, Ontario
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=166774#166774
________________________________ Message 5 _____________________________________
Time: 12:54:26 PM PST US
Subject: Prop Paint and Decals.
From: "CJcanuck" <m_kirk69(at)hotmail.com>
Hi All!

My prop is currently being overhauled and I'm having it stripped and repainted
while it's at the shop. As they doesn't stock blue prop paint I was hoping someone
might know where I can find some in the correct hue. I'd also appreciate
a line on either decals or stencils + paint for the blade markings.
Thanks!

Mike Kirk
C-GYMK
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=166792#166792
________________________________ Message 6 _____________________________________
Time: 12:55:50 PM PST US
Subject: WTB Parachute/GPS
From: "GreasySideUp" <greasysideup(at)hotmail.com>
The Yak deal went through!!! Now I need a seatpack chute and possibly a GPS. Please
send me an email with price/pics/date of repack and manufacture to greasysideup
at hotmail.com I am 200#

GPS looking for a descent handheld to keep me out of trouble, any recommendations
also welcome.

Thanks

-j
Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=166793#166793
________________________________ Message 7 _____________________________________
Time: 01:30:49 PM PST US
From: "doug sapp" <dougsappllc(at)gmail.com>
Subject: Re: Prop Paint and Decals.

Mike,
I stock the decals for the J9-G1 propeller. Contact me off list. As far as
the paint goes, you might try any high end auto paint vendor, many have the
ability to match exactly what you need if you have the original color paint
sample.
On Thu, Feb 28, 2008 at 12:51 PM, CJcanuck <m_kirk69(at)hotmail.com> wrote:


> Hi All!
>
> My prop is currently being overhauled and I'm having it stripped and
> repainted while it's at the shop. As they doesn't stock blue prop paint I
> was hoping someone might know where I can find some in the correct hue. I'd
> also appreciate a line on either decals or stencils + paint for the blade
> markings.
> Thanks!
>
> Mike Kirk
> C-GYMK
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=166792#166792
>

r


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group