Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Poly Fiber Polybrush

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

patreilly43(at)hotmail.co
Guest

Posted: Thu Mar 06, 2008 2:20 pm Post subject: Poly Fiber Polybrush

Kitfoxers, I have completeled the first coat of  Poly Brush applied with a brush as directed. It appears to have taken the 1st  coat fine. The recommended standard proceedure is to give the plane 2  additional sprayed coats of Poly Brush before applying Poly  Spray. Has anyone attempted to apply a 2nd coat  of Poly Brush with brush or roller?

  

  

 Pat Reilly

 Mod 3 Rebuild

 Rockford, IL 

   [quote][b]

darinh

Joined: 20 Apr 2006
Posts: 327
Location: Utah

Posted: Thu Mar 06, 2008 4:15 pm Post subject: Re: Poly Fiber Polybrush

Pat,



I sprayed mine so I can't answer your question but I would be most worried about not getting even coverage with a brush or roller.  Also, the chance of brush marks/roller marks would steer me away from this approach.  Just curious, why would you consider brushing or rolling these coats?  



As I understand it, the Polybrush is one of the most important steps to do right or you get major problems with pinholes.  Having just finished my color coats, I am happy to say that my paint went way better than I could have hoped.  I followed the Poly Fiber manual to the letter as far as the polybrush and polyspray are considered.

_________________
Darin Hawkes
Series 7
914 Turbo
Kaysville, Utah

rdmac(at)swbell.net
Guest

Posted: Thu Mar 06, 2008 4:19 pm Post subject: Poly Fiber Polybrush

Yes,  

            I used a short nap roller to apply the second coat and then followed right behind it with a foam brush to smooth out the tiny air bubbles that formed. Worked well for me.  

     

Roger McConnell, Duncan, OK  

Model 7 Trigear, Rotax 912uls   

Flying sense Jan. 06  

  

         

  

From: owner-kitfox-list-server(at)matronics.com [mailto:owner-kitfox-list-server(at)matronics.com] On Behalf Of Pat Reilly

 Sent: Thursday, March 06, 2008 4:17 PM

 To: kitfox-list(at)matronics.com

 Subject: Poly Fiber Polybrush  

  

     

Kitfoxers, I have completeled the first coat of Poly Brush applied with a brush as directed. It appears to have taken the 1st coat fine. The recommended standard proceedure is to give the plane 2 additional sprayed coats of Poly Brush before applying Poly Spray. Has anyone attempted to apply a 2nd coat of Poly Brush with brush or roller?  

    

   

    

   

    

Pat Reilly  

    

Mod 3 Rebuild  

    

Rockford, IL   

   	  Quote: 	
		    http://www.matronics.com/Navigator?Kitfox-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

       [quote][b]

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Thu Mar 06, 2008 5:06 pm Post subject: Poly Fiber Polybrush

Not here...why would you want to? The result with a brush or roller  

would be just that much more that you'd have to smooth out later, I'm  

afraid.

I think the reason that the first coat is done with a brush is so  

that you get complete penetration with the first coat. The additional  

coats smooth out the first coat and "gives additional  fill and  

flexibility to the job without adding excessive weight." ...quoted  

from the manual...you DO have the manual, right, Pat?



Lynn Matteson

Grass Lake, Michigan

Kitfox IV Speedster  w/Jabiru 2200

flying w/475+ hrs

On Mar 6, 2008, at 5:17 PM, Pat Reilly wrote:



 	  Quote: 	
		   Kitfoxers, I have completeled the first coat of Poly Brush applied  

 with a brush as directed. It appears to have taken the 1st coat  

 fine. The recommended standard proceedure is to give the plane 2  

 additional sprayed coats of Poly Brush before applying Poly Spray.  

 Has anyone attempted to apply a 2nd coat of Poly Brush with brush  

 or roller?

 Pat Reilly

 Mod 3 Rebuild

 Rockford, IL

 http://www.matronics.com/Navigator?Kitfox-List_- 

 ============================================================ _- 

 forums.matronics.com_- 

 ============================================================ _- 

 contribution_- 

 ============================================================

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

patreilly43(at)hotmail.co
Guest

Posted: Thu Mar 06, 2008 7:17 pm Post subject: Poly Fiber Polybrush

Lynn, Yes, I do have the manual. And, they state that the 1st coat penetration is better with the brush. The 1st coat is very smooth. Spray coats will not smooth it out as it is aleady as smooth as it could be. The cloth weave  does need more fill. The only place I have to smooth with a mek soaked rag is along the tapes very slightly. I believe that with the right type roller or possibly the right brush technique, it may be as smooth as a spray application. I figured somebody out there had tried.

 Pat Reilly

 Mod 3 rebuild

 Rockford, IL

 	  Quote: 	
		   From: lynnmatt(at)jps.net

 Subject: Re: Kitfox-List: Poly Fiber Polybrush

 Date: Thu, 6 Mar 2008 20:03:41 -0500

 To: kitfox-list(at)matronics.com

 --> Kitfox-List message posted by: Lynn Matteson <lynnmatt(at)jps.net>

 Not here...why would you want to? The result with a brush or roller 

 would be just that much more that you'd have to smooth out later, I'm 

 afraid.

 I think the reason that the first coat is done with a brush is so 

 that you get complete penetration with the first coat. The additional 

 coats smooth out the first coat and "gives additional fill and 

 flexibility to the job without adding excessive weight." ...quoted 

 from the manual...you DO have the manual, right, Pat?

 Lynn Matteson

 Grass Lake, Michigan

 Kitfox IV Speedster w/Jabiru 2200

 flying w/475+ hrs

 On Mar 6, 2008, at 5:17 PM, Pat Reilly wrote:

 > Kitfoxers, I have completeled the first coat of Poly Brush applied 

 > with a brush as directed. It appears to have taken the 1st coat 

 > fine. The recommended standard proceedure is to give the plane 2 

 > additional sprayed coats of Poly Brush before applying Poly Spray. 

 > Has anyone attempted to apply a 2nd coat of Poly Brush with brush 

 > or roller?

 >

 >

 > Pat Reilly

 > Mod 3 Rebuild

 > Rockford, IL

 > http://www.matronics.com/Navigator?Kitfox-List_- 

 > ========== _- 

 > forums.matronics.com_- 

 > ========== _- 

 > contribution_- 

 > ===================================

  [quote][b]

patreilly43(at)hotmail.co
Guest

Posted: Thu Mar 06, 2008 7:22 pm Post subject: Poly Fiber Polybrush

Roger, Thanks for the reply. I had tested a small patch with a foam roller. The mek made the roller swell up but it held together. There were alot of tiny air bubbles. I wiped them very quickly with a rag. It is pretty smooth and your foam brush idea just may be the ticket.

  

  

 Pat Reilly

 Mod 3 Rebuild

 Rockford, IL 

 [quote]  From: rdmac(at)swbell.net

To: kitfox-list(at)matronics.com

Subject: RE: Kitfox-List: Poly Fiber Polybrush

Date: Thu, 6 Mar 2008 18:17:29 -0600



   .ExternalClass .EC_shape {;}       .ExternalClass EC_p.MsoNormal, .ExternalClass EC_li.MsoNormal, .ExternalClass EC_div.MsoNormal {margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass a:link, .ExternalClass EC_span.MsoHyperlink {color:blue;text-decoration:underline;} .ExternalClass a:visited, .ExternalClass EC_span.MsoHyperlinkFollowed {color:blue;text-decoration:underline;} .ExternalClass EC_p.MsoAutoSig, .ExternalClass EC_li.MsoAutoSig, .ExternalClass EC_div.MsoAutoSig {margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass pre {margin-bottom:.0001pt;font-size:10.0pt;font-family:'Courier New';} .ExternalClass EC_span.EmailStyle18 {font-family:Arial;color:navy;} (at)page Section1 {size:8.5in 11.0in;} .ExternalClass EC_div.Section1 {page:Section1;}     

Yes, 

            I used a short nap roller to apply the second coat and then followed right behind it with a foam brush to smooth out the tiny air bubbles that formed. Worked well for me. 

   

Roger McConnell, Duncan, OK 

Model 7 Trigear, Rotax 912uls  

Flying sense Jan. 06

 

     

 

From: owner-kitfox-list-server(at)matronics.com [mailto:owner-kitfox-list-server(at)matronics.com] On Behalf Of Pat Reilly

Sent: Thursday, March 06, 2008 4:17 PM

To: kitfox-list(at)matronics.com

Subject: Poly Fiber Polybrush

 

   

Kitfoxers, I have completeled the first coat of Poly Brush applied with a brush as directed. It appears to have taken the 1st coat fine. The recommended standard proceedure is to give the plane 2 additional sprayed coats of Poly Brush before applying Poly Spray. Has anyone attempted to apply a 2nd coat of Poly Brush with brush or roller?

  

 

  

 

  

Pat Reilly

  

Mod 3 Rebuild

  

Rockford, IL 

 	  Quote: 	
		    http://www.matronics.com/contribution 	
0

 	  Quote: 	
		   	
1[b]

patreilly43(at)hotmail.co
Guest

Posted: Thu Mar 06, 2008 7:42 pm Post subject: Poly Fiber Polybrush

Darin,  2 reasons I am considering a roller or brush for the 2nd and maybe 3rd Poly Brush coat is the pinholes that occur when applying the 2nd Poly Brush coat sprayed on must be areas that were not filled with the brushed on 1st coat. A 2nd brushed on coat would eliminate any areas missed with the 1st coat. The 2nd reason is it is easier to roller and I'm not sure a sprayed on coat would be any smoother than a properly rolled one. My 1st brushed on coat is as smooth as it could get. Proper brush technique is, apply and leave it be. Any extra brushing with mek based highly volitile carrier paints is futile. I watched my partners at Oshkosh in the mini covering class attempt to "dab" Poly Tak. They couldn't apply an 8" long strip of Poly Tak with their dab method before the 1st 6" of Poly Tak had dried. 

  

 Pat Reilly

 Mod 3 Rebuild

Rockford, IL

 	  Quote: 	
		   Subject: Re: Poly Fiber Polybrush

 From: gerns25(at)netscape.net

 Date: Thu, 6 Mar 2008 16:15:11 -0800

 To: kitfox-list(at)matronics.com

 

 --> Kitfox-List message posted by: "darinh" <gerns25(at)netscape.net>

 

 Pat,

 

 I sprayed mine so I can't answer your question but I would be most worried about even coverage with a brush. Also, the chance of brush marks/roller marks would steer me away from this approach. Just curious, why would you consider brushing or rolling these coats? 

 

 As I understand it, the Polybrush is one of the most important steps to do right or you get major problems with pinholes. Having just finished my color coats, I am happy to say that my paint went way better than I could have hoped. I followed the Poly Fiber manual to the letter as far as the polybrush and polyspray are considered.

 

 --------

 Darin Hawkes

 Series 7 (Painting)

 914 Turbo

 Kaysville, Utah

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=168129#168129

 

 

 

 

 

 

&====================
	


 	  Quote: 	
		   

 

 


	


  [quote][b]

darinh

Joined: 20 Apr 2006
Posts: 327
Location: Utah

Posted: Thu Mar 06, 2008 8:37 pm Post subject: Re: Poly Fiber Polybrush

Pat,



You are correct in that if you didn't get the proper amount applied with the first brush coat, then a second brush coat would be beneficial to seal and prevent pinholes.  However, I have found that if you follow the manual exactly as it is written, you will have no problems with pinholes...at least I didn't.  



On the brush/roller technique being as smooth as spraying, I will have to respectfully disagree.  I have never seen a brushed or rolled finish be even close to as smooth as a sprayed finish.  I am not saying it won't work, I just think it is much more work and you have more of a chance of missing an area.  If you decide to go this route, let us know how it turns out.

_________________
Darin Hawkes
Series 7
914 Turbo
Kaysville, Utah

Float Flyr

Joined: 19 Jul 2006
Posts: 2704
Location: Campbellton, Newfoundland

Posted: Fri Mar 07, 2008 5:48 am Post subject: Poly Fiber Polybrush

That can be done....BUT!!!  don’t expect those coats of poly brush to be even and DO expect lots of lint etc in those coats.  You will be spraying the final coats so why not spray the poly brush??    

   

   

[img]cid:image001.jpg(at)01C8803B.A2FC5210[/img]  

   

Noel Loveys  

Campbellton, NL, Canada  

CDN AME intern, PP-Rec  

C-FINB, Kitfox III-A  

582 B box, Ivo IFA, Aerocet 1100 floats  

[url=noelloveys(at)yahoo.ca]noelloveys(at)yahoo.ca[/url]  

   

   

       

From: owner-kitfox-list-server(at)matronics.com [mailto:owner-kitfox-list-server(at)matronics.com] On Behalf Of Pat Reilly

 Sent: Thursday, March 06, 2008 6:47 PM

 To: kitfox-list(at)matronics.com

 Subject: Poly Fiber Polybrush  

  

  

     

Kitfoxers, I have completeled the first coat of Poly Brush applied with a brush as directed. It appears to have taken the 1st coat fine. The recommended standard proceedure is to give the plane 2 additional sprayed coats of Poly Brush before applying Poly Spray. Has anyone attempted to apply a 2nd coat of Poly Brush with brush or roller?  

    

   

    

   

    

Pat Reilly  

    

Mod 3 Rebuild  

    

Rockford, IL   

   	  Quote: 	
		    http://www.matronics.com/Navigator?Kitfox-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9

image001.jpg

Description:

Filesize:

5.18 KB

Viewed:

6225 Time(s)

_________________
Noel Loveys
Kitfox III-A
Aerocet 1100 Floats

flier

Joined: 09 Jul 2007
Posts: 25

Posted: Mon Mar 10, 2008 1:33 pm Post subject: Re: Poly Fiber Polybrush

You'll be VERY sorry if you don't spray.  Polybrush self levels but only if it has time to flow out.  Don't worry about pinholes as the spray coats will take care of those.  If not, the Poly Spray coats will.



As already pointed out, any other application technique will leave brush marks and residue that will have to be corrected with Poly Spray and extended wet sanding.  Lots more work and cost.



Regards,



Ted

962TC

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum