Matronics Email Lists :: View topic - Fuel Injector Servo SB

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fuel Injector Servo SB

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

ron.mcgann(at)baesystems.
Guest

Posted: Thu Mar 13, 2008 2:29 pm Post subject: Fuel Injector Servo SB

G'day all,   

There is a service bulletin on the Precision Airmotive series of Fuel Injectors requiring immediate attention.  http://www.precisionairmotive.com/Publications/PEX-1.pdf refers.  

I have not checked the part number of the servo delivered with my new Lyco from Vans, but I'm pretty sure it is one of the affected items.  

I don't recall seeing any posts on this issue on the list, so I thought I would pass on the details.  Apologies in advance if this is not relevant to the fuel injection servos we have on our 540's.  

Cheers,  

Ron  

-187 finishing (was going to install the servo tonight!)   [quote]"Warning:

The information contained in this email and any attached files is

confidential to BAE Systems Australia. If you are not the intended

recipient, any use, disclosure or copying of this email or any

attachments is expressly prohibited.  If you have received this email

in error, please notify us immediately. VIRUS: Every care has been

taken to ensure this email and its attachments are virus free,

however, any loss or damage incurred in using this email is not the

sender's responsibility.  It is your responsibility to ensure virus

checks are completed before installing any data sent in this email to

your computer."



[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

ron.mcgann(at)baesystems.
Guest

Posted: Thu Mar 13, 2008 8:20 pm Post subject: Fuel Injector Servo SB

Checked my injector servo at lunch time (straight out of  the box, not yet installed).  Although the plug was lockwired it was  clearly loose.  Since the only heat my engine has been exposed to is the  test run conducted at the factory, shrinkage of the seal with heat is not the  only problem here.  I doubt the plug was properly torqued at the factory  before delivery.

  

 check those servos!!

  

 cheers,

 Ron



 [quote]         From: owner-rv10-list-server(at)matronics.com    [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of McGANN,    Ron

Sent: Friday, 14 March 2008 8:55 AM

To:    rv10-list(at)matronics.com

Subject: Fuel Injector Servo    SB

   

   

G'day all,     

There is a service bulletin on the Precision    Airmotive series of Fuel Injectors requiring immediate attention.     http://www.precisionairmotive.com/Publications/PEX-1.pdf refers.   

I have not checked the part number of the servo    delivered with my new Lyco from Vans, but I'm pretty sure it is one of the    affected items.   

I don't recall seeing any posts on this issue on    the list, so I thought I would pass on the details.  Apologies in advance    if this is not relevant to the fuel injection servos we have on our    540's.   

Cheers, 

Ron 

-187 finishing (was going to    install the servo tonight!)  	  Quote: 	
		  "Warning:

The information contained in this email and any attached files is

confidential to BAE Systems Australia. If you are not the intended

recipient, any use, disclosure or copying of this email or any

attachments is expressly prohibited.  If you have received this email

in error, please notify us immediately. VIRUS: Every care has been

taken to ensure this email and its attachments are virus free,

however, any loss or damage incurred in using this email is not the

sender's responsibility.  It is your responsibility to ensure virus

checks are completed before installing any data sent in this email to

your computer."







p://www.matronics.com/Navigator?RV10-List

ics.com

.matronics.com/contribution



	
"Warning:

The information contained in this email and any attached files is

confidential to BAE Systems Australia. If you are not the intended

recipient, any use, disclosure or copying of this email or any

attachments is expressly prohibited.  If you have received this email

in error, please notify us immediately. VIRUS: Every care has been

taken to ensure this email and its attachments are virus free,

however, any loss or damage incurred in using this email is not the

sender's responsibility.  It is your responsibility to ensure virus

checks are completed before installing any data sent in this email to

your computer."



[b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

acs(at)acspropeller.com.a
Guest

Posted: Thu Mar 13, 2008 10:09 pm Post subject: Fuel Injector Servo SB

This is the FAA AD Ron is referring to in case some of you don’t have the info through the mail yet..  

I could say something with regards experimental and some earlier comments but I’ll resist J  

John 40315.   

         

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of McGANN, Ron

 Sent: Friday, 14 March 2008 2:17 PM

 To: rv10-list(at)matronics.com

 Subject: RE: Fuel Injector Servo SB  

  

   

Checked my injector servo at lunch time (straight out of the box, not yet installed).  Although the plug was lockwired it was clearly loose.  Since the only heat my engine has been exposed to is the test run conducted at the factory, shrinkage of the seal with heat is not the only problem here.  I doubt the plug was properly torqued at the factory before delivery.  

   

check those servos!!  

   

cheers,  

Ron   	  Quote: 	
		    

       

  

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of McGANN, Ron

 Sent: Friday, 14 March 2008 8:55 AM

 To: rv10-list(at)matronics.com

 Subject: Fuel Injector Servo SB  

G'day all,   

There is a service bulletin on the Precision Airmotive series of Fuel Injectors requiring immediate attention.  http://www.precisionairmotive.com/Publications/PEX-1.pdf refers.  

I have not checked the part number of the servo delivered with my new Lyco from Vans, but I'm pretty sure it is one of the affected items.  

I don't recall seeing any posts on this issue on the list, so I thought I would pass on the details.  Apologies in advance if this is not relevant to the fuel injection servos we have on our 540's.  

Cheers, 

 Ron 

 -187 finishing (was going to install the servo tonight!)    	  Quote: 	
		  "Warning:The information contained in this email and any attached files isconfidential to BAE Systems Australia. If you are not the intendedrecipient, any use, disclosure or copying of this email or anyattachments is expressly prohibited.  If you have received this emailin error, please notify us immediately. VIRUS: Every care has beentaken to ensure this email and its attachments are virus free,however, any loss or damage incurred in using this email is not thesender's responsibility.  It is your responsibility to ensure viruschecks are completed before installing any data sent in this email toThe information contained in this email and any attached files is 	
0 	  Quote: 	
		  The information contained in this email and any attached files is 	
1 	  Quote: 	
		  The information contained in this email and any attached files is 	
2 	  Quote: 	
		  The information contained in this email and any attached files is 	
3 	  Quote: 	
		  The information contained in this email and any attached files is 	
4 	  Quote: 	
		  The information contained in this email and any attached files is 	
5 	  Quote: 	
		  The information contained in this email and any attached files is 	
6 	  Quote: 	
		  The information contained in this email and any attached files is 	
7The information contained in this email and any attached files is 	
8 	  Quote: 	
		  The information contained in this email and any attached files is 	
9 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
0 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
1 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
2 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
3 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
4 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
5 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
6 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
7 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
8 	  Quote: 	
		  confidential to BAE Systems Australia. If you are not the intended 	
9 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
0 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
1 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
2 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
3 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
4 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
5 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
6 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
7 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
8 	  Quote: 	
		  recipient, any use, disclosure or copying of this email or any 	
9 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
0 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
1 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
2 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
3 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
4 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
5 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
6 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
7 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
8 	  Quote: 	
		  attachments is expressly prohibited.  If you have received this email 	
9

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

2008-06-51_Emergency.pdf

Description:

Download

Filename:

2008-06-51_Emergency.pdf

Filesize:

23.81 KB

Downloaded:

167 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum