Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Primer overhead console and cabin interior

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
hotwheels



Joined: 01 Jun 2007
Posts: 240
PostPosted: Mon Mar 31, 2008 4:55 pm    Post subject: Primer overhead console and cabin interior Reply with quote
Dear Listers,

I'm priming the cabin interior and overhead console in preparation from painting w/ PPG topcoat. The PPG Primer Wash says "not recommended for use on fiberglass". What to use?

Anyone know if 988 shake and rattle auto body primer would work okay? It seems to stick pretty well.

Thanks in advance for replies.

Regards,
Jay
more than ready to attach cabin top to fuse...

do not archive

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message
AirMike



Joined: 27 Feb 2007
Posts: 514
Location: Nevada
PostPosted: Mon Mar 31, 2008 7:01 pm    Post subject: Primer overhead console and cabin interior Reply with quote
I like the 2 part epoxy primers - way better than the rattle can stuff.

I am not so keen on the rattle can stuff as it probably has some oils in it which may prevent good adhesion later.

I am using Nason (Dupont) products, but a friend of mine is using Sherwin Williams. If I were starting today, I would go with the SW product as it seems more uniform. The Epoxies are a pain to mix and spray, but they are tough as nails when dry

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

_________________
See you OSH '18
Q/B - sold.
Back to top
View user's profile Send private message
Tim Olson



Joined: 25 Jan 2007
Posts: 2872
PostPosted: Mon Mar 31, 2008 7:19 pm    Post subject: Primer overhead console and cabin interior Reply with quote
You don't use the wash primer on the glass. My painting area of
my site tells about it....I think it's PPG K-36 primer that you
use, mixed as a primer/sealer....where you mix it with paint.
That's the stuff to use for the glass. Actually, you'll use
that on the aluminum after the wash, too....as wash primer isn't
a sealer.

Tim Olson - RV-10 N104CD - Flying

jayb wrote:
Quote:


Dear Listers,

I'm priming the cabin interior and overhead console in preparation
from painting w/ PPG topcoat. The PPG Primer Wash says "not
recommended for use on fiberglass". What to use?

Anyone know if 988 shake and rattle auto body primer would work okay?
It seems to stick pretty well.

Thanks in advance for replies.

Regards, Jay more than ready to attach cabin top to fuse...

do not archive




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=174026#174026




- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
dlm46007(at)cox.net
Guest
PostPosted: Mon Mar 31, 2008 7:24 pm    Post subject: Primer overhead console and cabin interior Reply with quote
BTW the number I supplied off list is Sherman Williams primer.

--

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
drfred(at)suddenlinkmail.
Guest
PostPosted: Mon Mar 31, 2008 7:26 pm    Post subject: Primer overhead console and cabin interior Reply with quote
I used UV smooth prime outta Aircraft Spruce. Here's the link;

http://www.aircraftspruce.com/catalog/cspages/smoothprime.php

Fred Williams
40515
jayb wrote:
Quote:


Dear Listers,

I'm priming the cabin interior and overhead console in preparation from painting w/ PPG topcoat. The PPG Primer Wash says "not recommended for use on fiberglass". What to use?

Anyone know if 988 shake and rattle auto body primer would work okay? It seems to stick pretty well.

Thanks in advance for replies.

Regards,
Jay
more than ready to attach cabin top to fuse...

do not archive


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=174026#174026





- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group