 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Sam Brunson
Joined: 06 Apr 2008
Posts: 9
|
 Posted: Mon Apr 07, 2008 5:09 pm Post subject: wiring of 477 rotax |
 |
|
I need a little help!!! I have a used rotax 447 with single carb. There are three wire looms coming out of case. #1 has a yellow wire, and a yellow wire with black stripe on it. #2 has a green wire, and a green wire with black stripe on it. #3 has two black wires, and one brown wire. I need to know where these wires should be hooked up. There is only a pull starter, and no lights. I need to know how to wire it to run and how to wire in a tach. Also I think is puts out some voltage when running that may be used somewhere. Please Help????
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
Dale Ensing
Joined: 11 Jan 2006
Posts: 571
Location: Aero Plantation Weddington NC
|
| Posted: Mon Apr 07, 2008 6:15 pm Post subject: wiring of 477 rotax |
|
|
Sam, I have the info but it is in my hangar. If no one else gets the info to
you by tomorrow I'll send it to you.
Dale Ensing
---
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
Dale Ensing
RV-6A
Aero Plantation
Weddington NC |
|
| Back to top |
|
|
nuckolls.bob(at)cox.net
Guest
|
| Posted: Mon Apr 07, 2008 8:11 pm Post subject: wiring of 477 rotax |
|
|
At 06:09 PM 4/7/2008 -0700, you wrote:
| Quote: |
I need a little help!!! I have a used rotax 447 with single carb. There
are three wire looms coming out of case. #1 has a yellow wire, and a
yellow wire with black stripe on it. #2 has a green wire, and a green
wire with black stripe on it. #3 has two black wires, and one brown
wire. I need to know where these wires should be hooked up. There is
only a pull starter, and no lights. I need to know how to wire it to run
and how to wire in a tach. Also I think is puts out some voltage when
running that may be used somewhere. Please Help????
|
You can find a number of Rotax data packages at:
http://www.aeroelectric.com/Mfgr_Data/Rotax/
In particular, the information you want is in
the 503 series installation manual:
http://www.aeroelectric.com/Mfgr_Data/Rotax/Rotax_503_installation_manual.pdf
If you're wanting only the electrical system, download:
http://www.aeroelectric.com/Mfgr_Data/Rotax/Rotax_503_Electrical.pdf
Bob . . .
----------------------------------------)
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
----------------------------------------
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
