Matronics Email Lists :: View topic - 701 Elevator bellcrank

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

701 Elevator bellcrank

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

madriver(at)wildblue.net
Guest

Posted: Wed Apr 16, 2008 1:41 pm Post subject: 701 Elevator bellcrank

Posted before but no answers.  What does one use for reference when assembling the actuator rod from the bell crank to the control stick.  Print says neutral, old post said vertical.  Need to know if one assumes the rear holes on the bell crank are parallel to the stick or other ideas.  Or does on wait till you get the seat in with the elevator hooked up and establish the lenght at that time. 

  Thanks.

  

  Phil  CH-701 started Feb 2007 done ???? 

  [quote][b]

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

dougsnash

Joined: 14 Apr 2008
Posts: 281

Posted: Wed Apr 16, 2008 2:19 pm Post subject: 701 Elevator bellcrank

Phil, I was hoping someone else would step up on this

one so I kept quiet...



I have mounted my actuator rod to the bell crank and

left it long at the stick end.  Once I get the tail

mounted and the seat pans in, I'll figure out exactly

where I want my neutral to be.  This will likely be

part of the final assembly/rigging for me.



Doug MacDonald

CH-701 Scratch Builder

NW Ontario, Canada

Fuse on the gear, skinning wings



Do Not Archive



--- philip smith <madriver(at)wildblue.net> wrote:



 	  Quote: 	
		   Posted before but no answers.  What does one use for

 reference when

 assembling the actuator rod from the bell crank to

 the control stick.  Print

 says neutral, old post said vertical.  Need to know

 if one assumes the rear

 holes on the bell crank are parallel to the stick or

 other ideas.  Or does

 on wait till you get the seat in with the elevator

 hooked up and establish

 the lenght at that time.

 Thanks.

 

  Phil  CH-701 started Feb 2007 done ????

 


	


Be a better friend, newshound, and 

know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum