|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
nuckolls.bob(at)cox.net Guest
|
Posted: Thu May 08, 2008 6:50 am Post subject: Architecture Review |
|
|
At 06:55 AM 5/8/2008 -0400, you wrote:
Quote: | Attached is a pdf of the file.
|
Re: Z-19 Item Clarification
Hmmm. Perhaps there was some form of thread-creep
but the attached drawing has no resemblance to
Z-19. I'll have to let the List members work
on this. It's so far from the best I know how
to do, distilling it down to the simple-ideas
would take a significant amount of time . . .
a commodity I don't have in abundance right
now. Sorry.
Bob . . .
----------------------------------------)
( . . . a long habit of not thinking )
( a thing wrong, gives it a superficial )
( appearance of being right . . . )
( )
( -Thomas Paine 1776- )
----------------------------------------
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
sshook(at)cox.net Guest
|
Posted: Thu May 08, 2008 10:35 am Post subject: Architecture Review |
|
|
The design for power to the engine was from what Eggenfellner is
recommending and supporting. Power comes from the main buss to the engine
through the 4P3T switch. The 4P3T switch is to counter an alternator, a
relay failure, or exhaustion of the main battery.
If my alternator goes south:
1) Fly the Plane
2) Isolate the aux battery (aux batt switch off)
3) Find a close airport to land at.
4) Reduce non-essential electrical loads (AP, Radio, etc.) - Note I will
still have AHRS as both EFIS screens are battery backed up and I have
handheld backups (ICOM and GPS).
5) If I have still not landed after 30 minutes on the main battery - with
the flip of the 4P3T switch I still have the Aux battery to supply power to
keep the prop turning.
Please understand: I will not take any criticism personally. I would not
have submitted this to the list had I not expected corrections.
I don't want God beating the FAA to the crash site. The more eyes the
better.
There are already two suggestions from off-list responses that I have had
that I will likely incorporate - Remove Avionics Mater - move the momentary
push to start to the panel.
Scott R. Shook
RV-7A (Building)
N696JS (Reserved)
--
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|