 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
dougsnash
Joined: 14 Apr 2008
Posts: 281
|
 Posted: Sun May 25, 2008 12:25 pm Post subject: Flapperon spar location |
 |
|
Guys, can one of you kit builders please check a
physical measurment for me. I am re-starting into my
flapperons after taking a couple of month off to work
on my wings. I am not finding an absolute spar rivet
line location from the bottom trailing edge. Can
somebody please measure from the bottom trailing edge
to the factory rivet line on a kit skin? I am scratch
building so I have not got a pre drilled line to base
all of my other measurements on.
On page 7-A-2 it gives a summary of the rivet spacing
and when I add this up I get 174mm. I have a
flapperon made that has this distance and it doesn't
seem correct. It appears the spar is too close to the
nose bend.
Any ideas?
Doug MacDonald
CH-701 Scratch builder
NW Ontario, Canada
Almost ready for Pre-Cover Inspection.
Do Not Archive
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
 |
JohnDRead(at)aol.com
Guest
|
| Posted: Sun May 25, 2008 8:29 pm Post subject: Flapperon spar location |
|
|
Doug, I measured a skin and 174 mm is the distance from the TE to the prepunched rivet line.
John Read
Phone: 303-648-3261
Fax: 303-648-3262
Cell: 719-494-4567
In a message dated 5/25/2008 2:26:07 P.M. Mountain Daylight Time, dougsnash(at)yahoo.com writes:
| Quote: | --> Zenith701801-List message posted by: MacDonald Doug <dougsnash(at)yahoo.com>
Guys, can one of you kit builders please check a
physical measurment for me. I am re-starting into my
flapperons after taking a couple of month off to work
on my wings. I am not finding an absolute spar rivet
line location from the bottom trailing edge. Can
somebody please measure from the bottom trailing edge
to the factory rivet line on a kit skin? I am scratch
building so I have not got a pre drilled line to base
all of my other measurements on.
On page 7-A-2 it gives a summary of the rivet spacing
and when I add this up I get 174mm. I have a
flapperon made that has this distance and it doesn't
seem correct. It appears the spar is too close to the
nose bend.
Any ideas?
Doug MacDonald
CH-701 Scratch builder
NW Ontario, Canada
Almost ready for Pre-Cover Inspection.
Do Not Archive
= Use lities y --> - MATRONICS WEB FORUMS nbsp; - List Contribution Web Site ; =========================
|
Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food.
[quote][b]
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
dougsnash
Joined: 14 Apr 2008
Posts: 281
|
| Posted: Mon May 26, 2008 2:39 am Post subject: Flapperon spar location |
|
|
Thank a lot for your help John.
Doug M
Do not Archive
--- JohnDRead(at)aol.com wrote:
| Quote: | Doug, I measured a skin and 174 mm is the distance
from the TE to the
prepunched rivet line.
John Read
|
| | - The Matronics Zenith701801-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith701801-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
