Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

E-Bus Diode

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

user9253

Joined: 28 Mar 2008
Posts: 1929
Location: Riley TWP Michigan

Posted: Thu May 29, 2008 7:34 am Post subject: E-Bus Diode

 	  Quote: 	
		  Glenn, 	
These bridge diodes are used in Z drawings because they  are mechanically strong and easily mounted.  The bridge diode contains more  than one diode inside of the case.  You can either use one of the internal  diodes or two of them in parallel as B&C recommends.  Two diodes  in parallel might have the advantage of sharing the current flow and of having a  backup in case one diode opens up.  But just one of the diodes inside of  the bridge rectifier case is more than adequate for the task.  Just make  sure that the polarity is correct.  You could test the diode with a  continuity light to make sure that the current flows in the direction that you  want it to.

 Joe

   [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum