 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rv9jim(at)juno.com
Guest
|
 Posted: Thu May 29, 2008 12:27 pm Post subject: Heat Shrink Tubing |
 |
|
Dave,
Polyolefin tubing that I got from McMaster Carr. P/N 7856k133,
1/8" shrinks to 1/16". I used a bunch of this. If you are just
starting out, I would order at least 50'. If you have a glass panel and
other things on your panel, then I would order 75' at a minimum.
Remember that you will use about 2.5" to 3" on each wire. ID at each
end. It surprised me how much I used. I think I used around 100'. I
had to order twice to have enough for the job. I also got the next size
up but I used very little of it. Maybe 5' or so.
Jim Nelson
N15JN RV9-A
Ready to fly
(checking engine tomorrow)
____________________________________________________________
Click for online loan, fast & no lender fee, approval today
http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3m3WL26oQTuKSt19r5pFUpo7DwJjM1gfTggP4yFTSW11WAKN/
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
