|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
pennington(at)q.com Guest
|
Posted: Mon Jun 02, 2008 1:27 pm Post subject: Fatal crash of Lightning Aircraft |
|
|
<?xml:namespace prefix="v" /><?xml:namespace prefix="o" /><![endif]--> Good afternoon
There has been a fatal crash of a new Lightning Aircraft at the Marana Regional Airport North of Tucson, Arizona yesterday.
The accident was described to me as follows:
-Jerry was doing touch-and-go's at Marana Airport.
-After takeoff, he climbed to pattern altitude
-all the propeller bolts sheared and the prop spun off the engine
-Jerry was able to drop the nose and establish a glide in the pattern for a dead stick landing
-during the "base to final" turn, his air speed may have been too slow and caused the "stall/spin" into the ground.
I am told that, for some reason, Jerry or others, had just re-adjusted the left aileron noticeably lower than the right aileron. It is suspected that this may have contributed to the stall/spin scenario. At this time, we do not know why this adjustment was performed.
I have read reports about propeller nuts/bolts working loose when installed on wood props, but not shearing them. Has anyone else had this problem?
Additionally, is it customary to adjust ailerons so unbalanced as described above?
Thanks
Gary
[quote][b]
| - The Matronics Lightning-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Lightning-List |
|
|
|
Back to top |
|
|
pete(at)flylightning.net Guest
|
Posted: Mon Jun 02, 2008 1:56 pm Post subject: Fatal crash of Lightning Aircraft |
|
|
I know we all want more information but please be patient and we hope we can get some facts directly from the FAA and NTSB rather than from “someone told me” or the “accident was described to me” type of info. All I do know for sure is that the scenario below as described by Gary is factually inaccurate on most of the points.
As I posted earlier, Nick is going to Marana tomorrow and will get as many actual facts first hand. We will post those on this forum as soon as we have them but will not engage in speculation and rumors.
Pete Krotje
Arion Aircraft, LLC
From: owner-lightning-list-server(at)matronics.com [mailto:owner-lightning-list-server(at)matronics.com] On Behalf Of GARY PENNINGTON
Sent: Monday, June 02, 2008 4:25 PM
To: lightning-list(at)matronics.com
Subject: Fatal crash of Lightning Aircraft
Good afternoon
There has been a fatal crash of a new Lightning Aircraft at the [i]Marana[/i][i] Regional Airport[/i][i] [/i]North of Tucson, Arizona yesterday.
The accident was described to me as follows:
-Jerry was doing touch-and-go's at Marana Airport.
-After takeoff, he climbed to pattern altitude
-all the propeller bolts sheared and the prop spun off the engine
-Jerry was able to drop the nose and establish a glide in the pattern for a dead stick landing
-during the "base to final" turn, his air speed may have been too slow and caused the "[i]stall/spin" [/i]into the ground.
I am told that, for some reason, Jerry or others, had just re-adjusted the left aileron noticeably lower than the right aileron. It is suspected that this may have contributed to the stall/spin scenario. At this time, we do not know why this adjustment was performed.
I have read reports about propeller nuts/bolts working loose when installed on wood props, but not [i]shearing [/i]them. Has anyone else had this problem?
Additionally, is it customary to adjust ailerons so unbalanced as described above?
Thanks
Gary
Quote: | http://www.matronics.com/Navigator?Lightning-List | 0123456789
[quote][b]
| - The Matronics Lightning-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Lightning-List |
|
|
|
Back to top |
|
|
info(at)flylightning.net Guest
|
Posted: Mon Jun 02, 2008 1:57 pm Post subject: Fatal crash of Lightning Aircraft |
|
|
To group:
I would please ask that everyone for Jerry and his family that any and all speculation, thoughts, or any other comment about what may have happened be kept to your selves out of respect for those involved.
Much of the below information is inaccurate. We have released a short statement and will continue to be open will all as factual and accurate information is gathered and reviewed by either the FAA or the NTSB.
There are only a few witnesses to the accident and we know whom they are and what is fact to this point, and that information was released earlier.
Please again lets be respectful and let those who know do their jobs to give us an accurate and factual account of the events.
Nick Otterback
Arion Aircraft, LLC
From: owner-lightning-list-server(at)matronics.com [mailto:owner-lightning-list-server(at)matronics.com] On Behalf Of GARY PENNINGTON
Sent: Monday, June 02, 2008 4:25 PM
To: lightning-list(at)matronics.com
Subject: Fatal crash of Lightning Aircraft
Good afternoon
There has been a fatal crash of a new Lightning Aircraft at the [i]Marana[/i][i] Regional Airport[/i][i] [/i]North of Tucson, Arizona yesterday.
The accident was described to me as follows:
-Jerry was doing touch-and-go's at Marana Airport.
-After takeoff, he climbed to pattern altitude
-all the propeller bolts sheared and the prop spun off the engine
-Jerry was able to drop the nose and establish a glide in the pattern for a dead stick landing
-during the "base to final" turn, his air speed may have been too slow and caused the "[i]stall/spin" [/i]into the ground.
I am told that, for some reason, Jerry or others, had just re-adjusted the left aileron noticeably lower than the right aileron. It is suspected that this may have contributed to the stall/spin scenario. At this time, we do not know why this adjustment was performed.
I have read reports about propeller nuts/bolts working loose when installed on wood props, but not [i]shearing [/i]them. Has anyone else had this problem?
Additionally, is it customary to adjust ailerons so unbalanced as described above?
Thanks
Gary
Quote: | http://www.matronics.com/Navigator?Lightning-List | 0123456789
[quote][b]
| - The Matronics Lightning-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Lightning-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|