Matronics Email Lists :: View topic - N914KF has a new home

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

N914KF has a new home

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

darinh

Joined: 20 Apr 2006
Posts: 327
Location: Utah

Posted: Sun Jun 01, 2008 10:01 pm Post subject: N914KF has a new home

Just wanted to share my excitement with the group...over the weekend, I moved my 7 to its new home at OGD.  It is a 60' x 60' brand new hangar with an smooth as glass (well almost but just enough roughness to not slip around) epoxy floor and a huge hydro-swing door on the north and south ends.  I will be sharing it with two other planes...a Citabria and an RV4 but I am the only one there now.



I also started the final assembly process!  I can't wait for that first engine start and first flight!  Here is a picture of both wings and the tail on together for the first time.



The move went beautifully thanks to a couple friends and a giant 24' long x 102" wide flatbed trailer.



Lowell, I should be able to get to those louvers sometime soon.



Do Not Archive

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

DSCF2209 [1024x768].JPG

Description:

Filesize:

199.67 KB

Viewed:

390 Time(s)

DSCF2225 [1024x768].JPG

Description:

Filesize:

99.59 KB

Viewed:

384 Time(s)

_________________
Darin Hawkes
Series 7
914 Turbo
Kaysville, Utah

kerrjohna(at)comcast.net
Guest

Posted: Mon Jun 02, 2008 8:49 am Post subject: N914KF has a new home

Darin, I had better come down to see that bad boy in person.

  

 John

  

 [quote]-------------- Original message -------------- 

From: "darinh" <gerns25(at)netscape.net> 



[quote] --> Kitfox-List message posted by: "darinh" 

 

 Just wanted to share my excitement with the group...over the weekend, I moved my 

 7 to its new home at OGD. It is a 60' x 60' brand new hangar with an smooth as 

 glass (well almost but just enough roughness to not slip around) epoxy floor and 

 a huge hydro-swing door on the north and south ends. I will be sharing it with 

 two other planes...a Citabria and an RV4 but I am the only one there now. 

 

 I also started the final assembly process! I can't wait for that first engine 

 start and first flight! Here is a picture of both wings and the tail on 

 together for the first time. 

 

 The move went beautifully thanks to a couple   frien  [quote][b]

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

darinh

Joined: 20 Apr 2006
Posts: 327
Location: Utah

Posted: Mon Jun 02, 2008 10:24 am Post subject: Re: N914KF has a new home

Yes, I agree.  Hangar is N999 on the south side.  I will be spending quite a bit of time there (especially in the evenings) for the next couple months.

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Darin Hawkes
Series 7
914 Turbo
Kaysville, Utah

dan(at)azshowersolutions.
Guest

Posted: Mon Jun 02, 2008 1:54 pm Post subject: N914KF has a new home

Darin, Nice job on the paint and congratulations on the progress.

  Dan B

  Mesa



darinh <gerns25(at)netscape.net> wrote:

  [quote]--> Kitfox-List message posted by: "darinh" 



Just wanted to share my excitement with the group...over the weekend, I moved my 7 to its new home at OGD. It is a 60' x 60' brand new hangar with an smooth as glass (well almost but just enough roughness to not slip around) epoxy floor and a huge hydro-swing door on the north and south ends. I will be sharing it with two other planes...a Citabria and an RV4 but I am the only one there now.



I also started the final assembly process! I can't wait for that first engine start and first flight! Here is a picture of both wings and the tail on together for the first time.



The move went beautifully thanks to a couple [quote][b]

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum