 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
pkeast
Joined: 15 Mar 2008
Posts: 4
|
 Posted: Sun Jun 29, 2008 4:20 pm Post subject: Stabilizer Fiberglass Tips - When to drill |
 |
|
Hi List,
I know the instructions call for drilling, but not riveting the fiberglass tips on the Stab. But after reading ahead, to ensure there is enough clearance for the elevator, should I wait to drill until after I complete the elevator???
thanks!
Peter
| | - The Matronics Zenith601-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
|
|
| Back to top |
|
 |
Jaybannist(at)cs.com
Guest
|
| Posted: Sun Jun 29, 2008 4:48 pm Post subject: Stabilizer Fiberglass Tips - When to drill |
|
|
Peter,
If you follow the instructions, drilling the tips early will not be a problem. You could wait until you have the elevator installed if you have doubts. But you don't want to rivet the tips. There are two tooling holes in the outboard ribs that establish the horizontal "line" of the stabilizer. You will want those holes accessible when you drill the stabilizer mounting brackets. A line between those two holes should be parallel to the top longeron of the fuselage.
Jay in Dallas
"pkeast" <peterkeast(at)cox.net> wrote:
| Quote: |
Hi List,
I know the instructions call for drilling, but not riveting the fiberglass tips on the Stab. But after reading ahead, to ensure there is enough clearance for the elevator, should I wait to drill until after I complete the elevator???
thanks!
Peter
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=190469#190469
|
| | - The Matronics Zenith601-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith601-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
