Matronics Email Lists :: View topic - Rudder pedal mounting

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Rudder pedal mounting

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

daveleikam(at)wi.rr.com
Guest

Posted: Mon Jun 30, 2008 7:32 pm Post subject: Rudder pedal mounting

The instructions have you cut  the F-6115 rudder pedal bearing block in half which removes  material and causes the part to clamp the rudder pedal  assemblies.  Has anyone used spacers between the two halfs to prevent the  action from being so stiff?

  

 Dave Leikam

#40496  N89DA  (Reserved)

Muskego, WI



   [quote][b]

Tim Olson

Joined: 25 Jan 2007
Posts: 2873

Posted: Mon Jun 30, 2008 8:41 pm Post subject: Rudder pedal mounting

It won't feel so bad when you actually get them mounted in

the plane and use your feet. Yes, by hand they feel really

stiff though.



Tim Olson - RV-10 N104CD - Flying

do not archive

Dave Leikam wrote:

 	  Quote: 	
		   The instructions have you cut the F-6115 rudder pedal bearing block in 

 half which removes material and causes the part to clamp the rudder 

 pedal assemblies.  Has anyone used spacers between the two halfs to 

 prevent the action from being so stiff?

  

 Dave Leikam

 #40496  N89DA (Reserved)

 Muskego, WI

Dave(at)AirCraftersLLC.co
Guest

Posted: Mon Jun 30, 2008 10:12 pm Post subject: Rudder pedal mounting

I opened up the holes a  bit for a looser fit.  You don't need anything super precise there, and  less friction is better.

  

  Dave Saylor

 AirCrafters LLC

 140 Aviation Way

 Watsonville, CA 

 831-722-9141

 831-750-0284 CL

 www.AirCraftersLLC.com

   From: owner-rv10-list-server(at)matronics.com  [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Dave  Leikam

Sent: Monday, June 30, 2008 8:29 PM

To: RV-10  matronics

Subject: Rudder pedal  mounting

 

 The instructions have you cut  the F-6115 rudder pedal bearing block in half which removes  material and causes the part to clamp the rudder pedal  assemblies.  Has anyone used spacers between the two halfs to prevent the  action from being so stiff?

  

 Dave Leikam

#40496  N89DA  (Reserved)

Muskego, WI



[quote]



href="http://www.matronics.com/Navigator?RV10-List">http://www.matronics.com/Navigator?RV10-List

href="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

[b]

Bldgrv10450(at)comcast.ne
Guest

Posted: Tue Jul 01, 2008 12:35 am Post subject: Rudder pedal mounting

Dave

  

 I didn't use any spacers on mine. I do however have  an alternate center support bushing and mounting bracket that attaches to the  stock firewall support bracket, not shown in the photo.

  

 Feedback and questions are welcome however please  be understanding, I am typing one finger / left handed from rotater cuff surgery  last week. 

  

 Paul Grimstad

 RV-10 450

 Portland, Or.



 [quote]   ---

monroe-photo-10-web.gif

Description:

Filesize:

289.45 KB

Viewed:

275 Time(s)

drfred(at)suddenlinkmail.
Guest

Posted: Tue Jul 01, 2008 6:23 am Post subject: Rudder pedal mounting

Paul :



Great looking set of pedals for the 10.  Hope your recovery is 

progressing well. 



Fred Williams. 

40515

working through the maze of wiring. 

will put the windshield in with weld on and the sides with silpruf.

AV8ORJWC

Joined: 13 Jul 2006
Posts: 1149
Location: Aurora, Oregon "Home of VANS"

Posted: Tue Jul 01, 2008 6:42 am Post subject: Rudder pedal mounting

Wow, now that is what the factory should have designed.  And the cables are concealed within the tunnel.  Reminds me of building hot-rods.  Is the foot pressure stiffer than stock?  

   

Nice photo.  

   

John Cox   

RV-10 600  

       

From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Paul Grimstad

 Sent: Tuesday, July 01, 2008 1:28 AM

 To: rv10-list(at)matronics.com

 Subject: Re: Rudder pedal mounting  

  

  

       

Dave  

    

   

    

I didn't use any spacers on mine. I do however have an alternate center support bushing and mounting bracket that attaches to the stock firewall support bracket, not shown in the photo.  

    

   

    

Feedback and questions are welcome however please be understanding, I am typing one finger / left handed from rotater cuff surgery last week.   

    

   

    

Paul Grimstad  

    

RV-10 450  

    

Portland, Or.  

  

  [quote]    

---

jim(at)CombsFive.Com
Guest

Posted: Tue Jul 01, 2008 6:58 am Post subject: Rudder pedal mounting

I added washers (same thickness as the band saw blade) between the two parts.



No gaps and no binding.



Jim Combs ======================================================

From: "Dave Leikam" <daveleikam(at)wi.rr.com>

Date: 2008/06/30 Mon PM 11:29:15 EDT

To: "RV-10 matronics" <rv10-list(at)matronics.com>

Subject: Rudder pedal mounting



The instructions have you cut the F-6115 rudder pedal bearing block in half which removes material and causes the part to clamp the rudder pedal assemblies.  Has anyone used spacers between the two halfs to prevent the action from being so stiff?



Dave Leikam

#40496  N89DA (Reserved)

Muskego, WI



============================================================

Deems Davis

Joined: 09 Jan 2006
Posts: 925

Posted: Tue Jul 01, 2008 7:04 am Post subject: Rudder pedal mounting

So when are you going to share (i.e. market)  those beauties with the 

rest of us ???????



Deems



and the brake cylinders and plumbing are 'hidden' on the back side!!!!!!

 	  Quote:

ricksked(at)embarqmail.co
Guest

Posted: Tue Jul 01, 2008 7:10 am Post subject: Rudder pedal mounting

Heh He...should be the same....2 foot pounds...one for each foot on each pedal    

Rick Sked 

40185

---

Bldgrv10450(at)comcast.ne
Guest

Posted: Tue Jul 01, 2008 8:12 am Post subject: Rudder pedal mounting

Deems,



There is one builder that should be installing a set very soon. I will be 

working closely with him on the details.

Marketing effort is slowly underway, for now we are just happy to be back to 

building our 10 kit and working on pedal design for the RV6,7 & 9.

Additionally, I have several pedal sets sold and we are planning a small 

production run. The system cost is $1,795.



Paul Grimstad

RV10 450

Portland, Or.



---

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Tue Jul 01, 2008 1:44 pm Post subject: Rudder pedal mounting

I know a patent attorney or two if it would help speed them to market.  



Deems Davis wrote:

 	  Quote: 	
		   



 So when are you going to share (i.e. market)  those beauties with the 

 rest of us ???????



 Deems



 and the brake cylinders and plumbing are 'hidden' on the back side!!!!!!

>

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum