Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

SBs slick mags

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

dlm46007(at)cox.net
Guest

Posted: Wed Jul 09, 2008 9:49 am Post subject: SBs slick mags

I spoke to the tech  rep and found that their are two failure modes. The mag numbers 0409 are  manufactured ninth month of 2004 etc. The bonded brushes introduced in 2006 have  a failure mode of hours. The failure mode of 2004 mags are perhaps hundreds  of hours. the 2006 mags were introduced to try and get rid of the failure mode  of the 2004 mags. The cases of failures are very few, mostly ( or all?) 2006  mags. He used the CYA term associated with the 2004 mags. Another interesting  fact is that the rated temps for these appliances is 185F. Oil door should be  left open to clear heat from engine after flight if able. Blast tubes are  advisable. He will be at OSH if you have further questions. He mentioned that as  experimentals we were not required to do these inspections; but I assured him  that we like to keep the fan running as well as the certified  crowd.

   [quote][b]

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum