earnestj(at)frontiernet.n
Guest
|
 Posted: Thu Jul 17, 2008 10:43 am Post subject: Tips or Advice for Maiden Flight?Tips or Advice for Maiden F |
 |
|
| Quote: | | Hi All, I mostly read the threads on this list. I have been working on a V Vixen that has 480 hours on the airframe, but I have just installed a new engine. Sub EA 81 Turbo. It is going for it’s condition inspection this week and hope to get it into the air in the next couple of weeks after some ground work. Does all the information pertain to a proven flying aircraft like the just built, or only the engine dying part? I have no time in a Kitfox, but not an inexperienced pilot. I will have a CFI check me out of course. I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. Ted darinh wrote: > Well, it is time for the first flight of N914KF. It seemed like this day would never come but it has. I am looking for good advice/tips for my maiden voyage...things that you guys have done that were good (or bad and wouldn't do again) that you could pass on. I have never been a test pilot so this is a firstI wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
0 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
1 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
2 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
3 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
4 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
5 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
6 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
7 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
8 | Quote: | | I wanted to thank all of you for the great information I have received while putting this Fox back together after 2 years on the ground. I don’t think I could have found all the resources I needed. |
9012345678901234567890123
[quote][b]
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
