Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Europa wing root fairings

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
fklein(at)orcasonline.com
Guest





PostPosted: Tue Jul 22, 2008 5:28 pm    Post subject: Europa wing root fairings Reply with quote

Quote:
Very cool! You will need to make a production mold for those.
There's going to be a serious demand for them!

Hey Bob,

Thanks...yes, cool is good!. But I believe they will function somewhat
better than Justin Kennedy's who claims enhanced performance...he sez
he "delays the wall of drag most Europas hit at 130 kts. until 150
kts". Justin also notes,

"Absolute cracking result. I predict you will be one of the fastest
Europas. Not only that but in a shallow cruise decent you should reach
Vne very, if not too, easily. Where and how to make the join is a tricky
one. I sent you pictures of how we did it but it is quite arbitrary. We
left a small amount of the under fairing attached to the flap which, as
it curled down, served to stop the air spilling off the end of the flap
in ground effect situations. The jury is still out on whether this is
desirable or not.

"When ours was test flown by Andy Draper at the factory we did not need
the stall strips on the leading edge as a satisfactory buffet was
experienced without them. Andy put this down to the wing roots so that
is something to look out for. I hate these little plastic stall strips
on the leading edge and was v. happy that we did not need them." (That
may be an issue particular to the Classic)

I'd love to see a set put on someone's plane which has recorded flight
test #s just to see what they do.

As for my mold, a local guy who used to do FG work at Boeing looked
over my shoulder and recommended 4 layers bid tooling cloth which is
8/9 oz. w/ a pretty tight weave...he's made many production molds from
FG, but we'll see.

You have GOT to be nearing First Flight!...I do envy you!

Fred
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group