Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

ch601 hds BUNGEE HELP!!!

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
klaus(at)utdallas.edu
Guest





PostPosted: Sun Jul 27, 2008 7:07 am    Post subject: ch601 hds BUNGEE HELP!!! Reply with quote

Hi Roger,

While the plane is on the ground, you can remove the top cap
since it will not be at the stop. You can also remove the bolts
under that wing, holding the gear in place, assuming that you have
already disconnected the brake line. Now when you slowly raise
the wing with a jack, the gear will come out of the gear box.

The reverse process is more difficult, since the bungees preload
the gear, and the bungees must be stretched if the gear tube
is to stick out a bit above the wing. There are two ways to
do this. First, you can use longer bolts with the top retaining
cap and gradually
pull up the tube from the top. When you cannot turn the
bolts any more, you lower the wing so that the weight
of the plane holds the gear up, remove one bolt at a time
and add washers, and repeat the process until you have pulled
up the tube to add the retaining plate with the originial bolts.
Another solution that makes subsequent bungee
changes really easy, is described on the page

http://utdallas.edu/~klaus/Airplane/gear_stop_by_bolt.html

Happy flying,

Klaus


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
hills(at)sunflower.com
Guest





PostPosted: Tue Jul 29, 2008 2:34 pm    Post subject: ch601 hds BUNGEE HELP!!! Reply with quote

Klaus;

Thanks for the info, I am getting the "gear change kit" from McFarland, he
has pics of it on his site and he has agreed to build me a kit.

Thanks again

Roger
--


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group