Matronics Email Lists :: View topic - Oil injection control cable

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Oil injection control cable

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

Ken Potter

Joined: 18 Aug 2007
Posts: 85
Location: Lanark, Ontario

Posted: Sat Aug 02, 2008 2:30 pm Post subject: Oil injection control cable

Hi Folks;



I spent the day installing the carbs on the Rotax 582.  After installing the cables, and adjusting the throw of the bellcrank I carefully tested the throttle in and out. The result was that the carb cables were perfect but the oil pump control cable kinked at the bellcrank when I pulled the throttle out (to idle). At this point the cable is scrap but after testing, it seems that the spring on the oil injection pump lever does not have enough power to pull the cable back.  Does anyone have experience with this problem??  



Cheers

Ken Potter

Kitfox II No. 483

Rotax 582, C Box

Just finishing "firewall forward"

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum